CF module connection problem

[Rainer Fritz]

So it seems it is the red SATA cable coming from the camera inside to the CF module, and there specialy the SATA connector. The cable is too inflexible, the connector not tight and turning the connector that a not proper connection is the result.
There should be a possibility to tighten the cable on the cf module.... it is boring and dangerous that after some days specialy when its cold and the cable more inflexible to put the cf module out and try to fix this problem...

CF cards then dont mount or sometimes mount and then not....
Data integrity is ok so far it looks like....

best,
rainer

 

[Aleksandar Colancevski]

All the pins on CF module OK?
I had an issue with bended pin. It happens, check it out.

 

[Rainer Fritz]

No the pins are ok. But I dont speak from the pins which connect the CF card with the CF Module, I speak from the SATA connector to the camera side. The hard SATA cable need support on the CF module that it cant move..... The Power cable is a big connector with flexible cables.... thats tight !!!