Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

camera getting hot - remove winter strips?

S

sander kamp

Well-known member
Joined
Dec 28, 2006
Messages
1,094
Reaction score
3
Points
38
Age
57
I just got my camera 441 here in Bangkok (yeah!).

Right now the camera is inside, I expect the ambient temperature to be 30 degrees Celsius (86 Fahrenheit), I'll buy a thermometer today to be sure. This is actually a cool day here in Thailand and the camera is getting very hot. I can put my hand on the top of the camera for about 5 seconds before I have to pull away. Fan is set to hot mode, running at full speed all the time which is very noisy. Temperature reads OK.

Is this normal behaviour for the camera? I read somewhere it should be okay up until 40 degrees Celsius but I am a bit worried about that now.

I remember something about removing winter strips from the air vents but can't find anything about it in the manual.
 
If the strips are in, you should remove them.

The camera body will feel hot to the touch way before you get a temperature warning in the LCD. And you will get the warning long before it stops working.

At 86 degrees, you will not have any problems.

Jim
 
How do I know if the strips are in? Does the camera normally come with strips installed? I opened the vents but don't know what to look for...
 
On the bottom of the camera there are vents on both sides. These both should have nothing blocking them. Let me know if there is something blocking them I can help you get them out. Thanks.
 
Cameras only shipped with winter strips for a very short period of time quite awhile ago. When they did, they were on the CF module side of camera at base in the ventilation holes.

BC
 
It looks like this when opened.
 
the filter would be on the vent that you just took off the camera. If it is not there, then your camera did not come with one.
 
So that plastic strip with dust filter is not the winter strip, right?
 
Brian Fairbanks said:
the filter would be on the vent that you just took off the camera. If it is not there, then your camera did not come with one.
Click to expand...

Come on, RED. This is a simple question, why am I not getting a simple answer.

There is a filter you can see on the picture. Is this a winter strip or not? And if it is not then what is it and what happens if I remove it?
 
looking at 103 - i do not have any "filter" like i see in your picture ..
 
If there is something on the piece you removed from the camera, then take it out. This filter is not necessary. I am sorry that this has been hard, I just could not see in the picture if anything was there or not.
 
This is confusing. There is a strip on the air vents in my camera but you don't know what it is? And cameras stopped shipping with winter strips a long time ago but then what is this?
 
I am sorry that this has been difficult. It is very important to make sure 100% that we are talking about the same thing. The filter that you had taken off is the cold weather one, and it needs to be taken out. As said before this was stopped a long time ago, but some did come in. We tried to catch them all, but clearly one slipped by, and we are sorry for the inconvience. At the same time Jim stated that the camera will shut itself off before it the heat will damage it. If you have any other questions please let us know.
 
Okay, it is clear now. But I do think RED should make sure it is not shipping cameras with winter strips to tropical countries.

I have removed them and will run a test to see if the camera runs cooler now.
 
You must log in or register to reply here.
Back
Top