[FS: SUPPORT] Bridgeplate for 19mm. rods, 12" dovetail and rods.

[Peter Gosens]

The bridgeplate can be configured with two inlays, Red style and Arri style. Its also possible to buy both inlays so you can mount Arri style and Red style camera's. An additional inlay to have both supported is 30 Euros extra.

Bridgeplate for 19mm. Rods
- 329 Euro. - Red inlay - Compatible with the Red One (MX), With the Scarlet and Epic only with a third party riser plate.

- 329 Euro. - Arri inlay - Compatible with Arri Alexa Studio, Arriflex 235, Arriflex D-21, Arriflex 435, Sony F23, Sony F35, Sony F65, SI-2K, Phantom and Weisscam HS-2. Our any other situation where a Arri BP-8 or BP-5 bridigeplate would fit. Like the new Vocas bridgeplate for the Sony F5.

12" Dovetail 210 Euro. Native compatibility with 2060, 2075, 120EX O’Connor and Sachtler Cine 30 heads.

12" Rods 19mm. 30 Euro each. Stainless steel.

Want to know more or if you have any questions, just have look at www.petergosens.com or give me a PM.

 

[Peter Gosens]

Just a small addition. If you buy a bridgeplate and a dovetail you will get two rods for free. To make you're setup complete.

 

[Peter Gosens]

Still available

 

[Peter Gosens]

Still selling them!

 

[Peter Gosens]

Still some available when interested!

 

[Peter Gosens]

Still a last few available. Now with a 20% discount.

 

[Peter Gosens]

Bridgeplate for 19mm. Rods
Now 265 Euro. - Red inlay - Compatible with the Red One (MX), With the Scarlet and Epic only with a third party riser plate.
Now 265 Euro. - Arri inlay - Compatible with Arri Alexa Studio, Arriflex 235, Arriflex D-21, Arriflex 435, Sony F23, Sony F35, Sony F65, SI-2K, Phantom and Weisscam HS-2. Our any other situation where a Arri BP-8 or BP-5 bridigeplate would fit. Like the new Vocas bridgeplate for the Sony F5. Also the Arri adapter plates like a BPA-2 fits on it. All at the correct height.

Now 170 euro 12" Dovetail Nativecompatibility with 2060, 2075, 120EX O’Connor and Sachtler Cine 30 heads.

Want to know more or if you have any questions, just have look at www.petergosens.com or give me a PM.

 

[Peter Gosens]

Still some available, when interested.

 

[Jean Wallez]

Peter Gosens's work is top notch. Highly recommended!