Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Anyone using eSata with their Red Station 1.8" and a PC?

M

Michael Gyori

Well-known member
Joined
Jan 7, 2012
Messages
141
Reaction score
0
Points
0
Location
Vancouver, Canada
I can't seem to get it hot swappable, which makes the station really annoying to use... I enabled AHCI in Windows 7 and in my BIOS, but it still seems flakey... I'd like it act like a CF card reader: the drive exists if a SSD card is plugged into the station, and no drive exists if none is plugged in. What are other people's experience with using eSata for the station and a PC? I read that hot swappable eSata is not possible with a MAC.

I'm also getting weird transfer times. When copying data to the SSD card in the station, I'm getting great transfer rates from about 75 mb/s to 95 mb/s. BUT, when copying that same data off of the SSD card, I'm getting less than 1 mb/s! Something isn't right.
 
Mine works well as it shoot on an HP workstation. From what I understand, if the eSata port is added as a card, it may have hot swap problems, especialy depends on the manufacturor, some state they don't support hot swap. If the eSata is on the motherboard - then for sure it hot swaps.
 
Ok, with AHCI setup in my Bios properly, I can insert the SSD mag into the Red station and the 'drive' pops up. The only annoying thing is that when I pull it out, Windows 7 takes a long time to figure out that it isn't there.

The main problem now is not hot-swapping but rather transfer speed. I'm only getting about 2.5 mb/s when trying to copy data off the SSD mag to a hard drive in my computer. My hard drives are capable of 100 mb/s from my NAS. What is wrong?
 
Do you have a separate PCIE eSata card or are you using an eSata port onboard your mobo? I had similar issues with my onboard eSata port. Got a $25 eSata card and stopped having the issues. Also of note, I had to force the drivers that came with the pcie card onto the computer, even though when I first put in the card Windows 7 said that the drivers were good. I get around 75-100MB/s up and down. For small files I have maxed at 160.
 
TonySegreto said:
Do you have a separate PCIE eSata card or are you using an eSata port onboard your mobo? I had similar issues with my onboard eSata port. Got a $25 eSata card and stopped having the issues. Also of note, I had to force the drivers that came with the pcie card onto the computer, even though when I first put in the card Windows 7 said that the drivers were good. I get around 75-100MB/s up and down. For small files I have maxed at 160.
Click to expand...

Can you share which $25 esata card you are referring to?
 
You must log in or register to reply here.
Back
Top