Nicholas Wise
Well-known member
- Joined
- Apr 10, 2014
- Messages
- 472
- Reaction score
- 0
- Points
- 16
ALL ITEMS SOLD
All products are original ACTION PRODUCTS items and were purchased new.
All are in excellent working condition and show minimal signs of wear.
All prices exclude shipping and PayPal fees. PM me for shipping quotes.
(Image at very bottom shows how modules connect to DSMC)
APOLLO top plate w/ screws SOLD
- Relocates HD-SDI port up top for ease of reach.
- Break-out from SYNC port to 3x SDI's: Timecode, GPI and Genlock (similar to WC's B-box but more elegant).
- Provides 2x 12volt Lemo-2pin ports (Arri-standard), one on each side, 1x 12volt Lemo-4pin port (Red-standard) and 1x 12/24volt* Fischer-3pin port (Arri-standard).
* 24volts only when used in conjunction with ELECTRA module (below).
NB: if you do not wish to use APOLLO in conjunction with PROTEUS module (below), you will need a Lemo-3pin to PTap cable for providing power. I can provide this at a $60 extra charge - just let me know what length you need.
- - -
PROTEUS module w/ screws SOLD
- This acts as the brain for all the other modules, routing power from the ELECTRA module (below)* to the DSMC (via the Lemo-6pin pigtail) and to the APOLLO top plate (above).
- Relocates the headphone port for ease of reach.
- Provides a 5volt Fischer-2pin port, for which I made a short coiled USB-mini cable so I could charge my Redmote. If you need this cable too, I will dig it out and sell for an extra $60. If you prefer it wired to an Apple Lighting port for charging your iPhone, let me know and I will see what I can do for you.
* if you do not wish to source power from the ELECTRA module, I can provide a Lemo-8pin to Ptap cable for $60 extra - just let me know what length you need. This cable will also work if you get the HYDRA module (below) as well.
- - -
HYDRA HD-SDI splitting module w/ BNC jumper SOLD
- Splits input in to 4 outputs, 3 on side and 1 underneath.
- Accepts 3G, HD and SD signals, works with all DSMC outputs.
- Power toggle switch with power/signal indicator LED's.
- Requires PROTEUS module (above).
- - -
ELECTRA power module Gold-Mount* SOLD
- Includes buffer circuitry and internal battery so you can hotswap bricks without powering down DSMC - by far the best feature of the AP modules, all my AC's fell in love with this function.
- Relocates the DSMC's Lemo-6pin power-in port for running off AC adaptor. Also includes XLR4 input port when using block battery.
- Provides 1x 12volt Lemo-2pin ports (Arri-standard), 1x 12volt Lemo-4pin port (Red-standard) and 1x 24volt Fischer-3pin port (Arri-standard).
- Provides 2x 12volt Ptap ports, one on module and one on battery plate.
- Requires PROTEUS module (above).
* if you need this to be V-mount instead, let me know and I will swap it out for you at cost. FYI, IDX and Blueshape make V-mount plates with USB ports.
- - -
Image below shows APOLLO, PROTEUS and ELECTRA connected to DSMC. HYDRA would fit between PROTEUS and ELECTRA. Image also shows riser with XLR breakout module, which I am also selling here.
All products are original ACTION PRODUCTS items and were purchased new.
All are in excellent working condition and show minimal signs of wear.
All prices exclude shipping and PayPal fees. PM me for shipping quotes.
(Image at very bottom shows how modules connect to DSMC)
APOLLO top plate w/ screws SOLD
- Relocates HD-SDI port up top for ease of reach.
- Break-out from SYNC port to 3x SDI's: Timecode, GPI and Genlock (similar to WC's B-box but more elegant).
- Provides 2x 12volt Lemo-2pin ports (Arri-standard), one on each side, 1x 12volt Lemo-4pin port (Red-standard) and 1x 12/24volt* Fischer-3pin port (Arri-standard).
* 24volts only when used in conjunction with ELECTRA module (below).
NB: if you do not wish to use APOLLO in conjunction with PROTEUS module (below), you will need a Lemo-3pin to PTap cable for providing power. I can provide this at a $60 extra charge - just let me know what length you need.
- - -
PROTEUS module w/ screws SOLD
- This acts as the brain for all the other modules, routing power from the ELECTRA module (below)* to the DSMC (via the Lemo-6pin pigtail) and to the APOLLO top plate (above).
- Relocates the headphone port for ease of reach.
- Provides a 5volt Fischer-2pin port, for which I made a short coiled USB-mini cable so I could charge my Redmote. If you need this cable too, I will dig it out and sell for an extra $60. If you prefer it wired to an Apple Lighting port for charging your iPhone, let me know and I will see what I can do for you.
* if you do not wish to source power from the ELECTRA module, I can provide a Lemo-8pin to Ptap cable for $60 extra - just let me know what length you need. This cable will also work if you get the HYDRA module (below) as well.
- - -
HYDRA HD-SDI splitting module w/ BNC jumper SOLD
- Splits input in to 4 outputs, 3 on side and 1 underneath.
- Accepts 3G, HD and SD signals, works with all DSMC outputs.
- Power toggle switch with power/signal indicator LED's.
- Requires PROTEUS module (above).
- - -
ELECTRA power module Gold-Mount* SOLD
- Includes buffer circuitry and internal battery so you can hotswap bricks without powering down DSMC - by far the best feature of the AP modules, all my AC's fell in love with this function.
- Relocates the DSMC's Lemo-6pin power-in port for running off AC adaptor. Also includes XLR4 input port when using block battery.
- Provides 1x 12volt Lemo-2pin ports (Arri-standard), 1x 12volt Lemo-4pin port (Red-standard) and 1x 24volt Fischer-3pin port (Arri-standard).
- Provides 2x 12volt Ptap ports, one on module and one on battery plate.
- Requires PROTEUS module (above).
* if you need this to be V-mount instead, let me know and I will swap it out for you at cost. FYI, IDX and Blueshape make V-mount plates with USB ports.
- - -
Image below shows APOLLO, PROTEUS and ELECTRA connected to DSMC. HYDRA would fit between PROTEUS and ELECTRA. Image also shows riser with XLR breakout module, which I am also selling here.
Last edited:
