90 Degree Lemo connector?

[Daniel John]

Hi all-

I've been running my Raven on a Ronin powered by the battery belt clip. Because the lemo out of that is straight and the power cord is relatively stiff, there
are clearance issues with it hitting the back of the gimbal if you tilt down. Anyone know of an adapter that you can plug into the power port with a 90 degree
elbow in it that would allow the power cord to enter that in a vertical fashion to give it more clearance? I found some on Alibaba but am skeptical as to their quality.

Thanks in advance.

Daniel

 

[Ugo Del]

This one? http://www.bhphotovideo.com/c/produ...mera_wc_172300_alterna_right_angle_power.html

 

[Michael Reiken]

I used the battery clip but hated it as it didn't clear and was too heavy. I use the DJI battery distributor and lemo cable it works great.

 

[Daniel John]

Thanks Ugo. I was hoping there was something more like the little 90 degree elbows they make for bnc that would just allow the power cable to be oriented vertically
when it was attached instead of sticking straight out the back of the camera.

Michael, are you powering the camera off the Ronin battery? If so, are you powering any other accessories off there as well? Remote follow focus or Teradek/Paralinx/etc?

Thanks!

 

[Peter Majtan]

This is one reason I now mostly use the MX. The rear battery just runs the Raven and the front-top battery runs the Ronin MX and all the accessories. I do power the wireless (Paralinx Arrow+ on the ground and the DJI's SRW-60G for aerials) from the USB on the JetPack, but all other accessories (when used) are powered from the R-MX...

P