Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

7" Monitor Strange Behavior

D

Dave Karger

Member
Joined
Jun 29, 2015
Messages
7
Reaction score
0
Points
0
I am having a strange issue with my 7" Red Touch on Dragon. When connected to the front of the brain, it works normally. The image and overlays are right side up. When connected to the +1 Module, the image is mirrored -- specifically, the image is upside down and backwards while the overlays are all upright. But when I connect an EVF to the same +1 Module with the same cable, the image and overlays are normal -- right side up. I have been in the SETTINGS, DISPLAY, MONITOR CONTROL menu, and neither of the FLIP/MIRROR or UI FLIP/MIRROR boxes are checked for both LCD, LCD 2 or anything else. Also, the FLIP/MIRROR SCAN DIRECTION under the SETTINGS, PROJECT, SENSOR is unchecked. Anyone experienced this? Thanks.
 
Last edited:
i've had some weird gremlins as well, but not the ones you speak of here. make sure you have the latest firmware on the brain, and that all the peripherals you're using have updated. that usually fixes everything outside the realm of signal tearing. i've even had issues that only occur when switching the scan direction. good luck!
 
You must log in or register to reply here.
Back
Top