Welcome to our community

Be a part of something great, join today!

  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

6K Real Time Render Server for $500

Clark McCauley

Well-known member
Joined
Oct 21, 2015
Messages
79
Reaction score
0
Points
0
Location
Eagle Idaho
I just parted out my custom loop PC and invested $500 in a dual Xeon L5640 2U server w/96GB of ECC RAM. I plan to turn it into a render server/file server. I pulled the reference 780Ti out of my last build and put the blower back on and managed to fit it in a PCI slot under the SAS card. I set up the drive array with a friend and am not totally sure what specific RAID we used, its 8 drives, 4x 2 drive mirrors striped between 2 blocks of 4 drives (120GB boot SSD and 500GB caching SSD).

I've been able to speed up my REDCODE 4k/5k/6k workflow drastically by getting the footage on RAM drives which have a couple GB/s transfer speed into premiere adn redcine-x. I can now EDIT 6K REALTIME. Also, I've been able to transcode REDCODE to ProRes 4:4:4:4 in realtime as well.

I'll do some more tests coming up. Let me know if you'd like to see anything specific!\

dell_fs12-ty_a.jpg
 
Awesome. Which SAS card is being used? Did you swap fan mechanisms? Are you editing from the RAM disk or RAID?
 
Awesome. Which SAS card is being used? Did you swap fan mechanisms? Are you editing from the RAM disk or RAID?

SAS Card - LSI 9207-8i

I put a manual fan controller in it that's powered of molex. I can leave the fans low for web browsing and ramp them up for transcoding.

I try to edit from RAM disk. I can usually get away with 80GB disks top until I upgrade. Good for smaller projects. After I'm done I use RedGiant Offload to move it all over to the storage array. I can edit 4k almost real time with off the array since it's striped, I think I can read 400MB/s off of it but I'll have to check on that one.
 
Wow.. nice
 
Wow.. nice

Thanks!

This was my solution so save a couple thousand on a redrocket card. While it's not as fast, I can edit faster than realtime and transcode at realtime without any really expensive hardware.

Here is how the array works:

There are 4x 750GB RAID Edition drives from WD in the red section. The left two are striped across each other and the right two, mirror the stripe on the left two. The yellow section is made up of 4x 500GB RAID Edition drives which are striped and mirrored the same as above. Bother red and yellow are built in a storage pool that makes one virtual drive where I can store data. The drives will soon be replaced with 4TB WDRE drives but I got them out of an old server and they do the trick for now.

hgD6pZT.png
 
Fan noise be loud. I can only assume there is machine room or garage? Is there an audio card?
 
Fan noise be loud. I can only assume there is machine room or garage? Is there an audio card?

I put a manual fan controller in it that's powered of molex. I can leave the fans low for web browsing and ramp them up for transcoding. They're actually impressively quiet when I have them on low and the CPUs don't get over 49C. The graphics card is the hottest part being so cramped up with the SAS card. The board only has one PCIe so using a 90 degree expander I can barely fit two cards in.

It also uses three powersupplies (2 required). One is dedicated to the graphics card while the other two are server and redundancy/load balancing.

I use a USB audio card which works a lot better than expected.
 
What is the ProRes solution on Windows platform?

What do you mean? Windows Server 2012 R2 doesn't actually come with any features to work with video so I had to go to roles and features to get the media package. Installing Quicktime allows Premiere pro to work with ProRes files.
 
Back
Top