[FS: SUPPORT] 3 Axis Gimbal - Allsteady 7 - $3600

[Andy Conrad]

Available at TurboAce.com

AllSteady-7 Features

* Exceptionally Rigid Carbon Fiber & CNC Aluminum Architecture
* 20 lbs Payload Capacity, the highest in the industry
* Run Time: 2 to 4 hours depending on operating conditions
* 3-Axis 32bit Alexmos Gimbal Controller with Dual Sensor implementation for fast, reliable and consistent orientation & stabilization.
* Ultra High Resolution Pan-Axis Motor with specialized large diameter and high stator count for exceptionally smooth panning without micro jitters.
* Differentiated Brushless Roll-Axis & Tilt-Axis Motors to optimize precision and tolerance to accommodate a wider range of camera and lens combinations.
* Anti Rotation Stopper on tilt-axis to prevent wire damage from accumulated 360 tilt-axis rotations.
* Multi-Directional Motor Shaft with tight tolerance mounting designed to secure and to eliminate slop in motor mechanism. (Patent Pending)
* Support Bearings integrated on all three motors to safeguard all vulnerable smaller motor bearings from premature wear and damage.
* Expanded Pan-Axis Motor Cage with zero slop integration for a tough 35mm ID / 44mm OD bearing to reinforce pan-axis function to sustain heavier payloads in tilted positions. (Patent Pending)
* Main Electronic Compartment houses the gimbal controller and features On/Off Power Switch and Battery Status Indicator LED.
* Aux Electronic Compartment houses either the 2nd Sensor or the Optional Aux Voltage Regulator.
* Integrated Battery Compartment for fast and secured loading to prevent battery movement from interfering with gimbal performance.
* Reversible Joystick Module for right or left handed users and for regular or inverted gimbal operations.
* Triple Booms Camera Tray locks camera and lens from both top & bottom, a critical set up that prevents vibrations and oscillation from surfacing.
* Toolless Macro Tilt-Axis & Roll-Axis CG Adjustments to accommodate major camera & lens changes
* Quick Release Levers on camera tray CG adjustments for fast and convenient camera & lens balancing
* Micro Roll-Axis Adjustment enables a wheel to pull and push the payload in micro increments thus eliminating trial and error in balancing. (Patent Pending)
* Internal Clamps integration in critical joints to prevent boom damage from over tightening and slippage from heavier payloads. (Patent Pending)
* Ergonomic Rubber Grip Handles adjustable in 45 degree increments to accommodate different operating positions.
* Comprehensive Wire Conduits/Protection, Hollow Motor Shafts and Slip Ring implementation for clean aesthetics with unimpeded gimbal functions.
* 4,000mah 4S Lithium Ion Smart Battery with Auto Shut-Off to prevent battery damage.
* Wall Charger to conveniently recharge batteries.
* Optional Aux Voltage Regulator for 5V or 12V
* Optional Wireless Joytick Controller Module
* Optional Live Video Feed for wireless operators


AllSteady-7 Specifications

* Payload Capacity: 20 lbs maximum depending on operating conditions
* Run Time: 2 to 4 hours depending on operating conditions
* 25mm Handle Bar Carbon Fiber Booms with Optional Monitor Mounting Bracket with Articulated Arm.
* 40mm Core Structural Carbon Fiber Booms with superior rigidity to support heavier payloads without bounce or slippage.
* 110mm x 37mm Pan Axis Motor Cage with 35mm ID & 44mm OD
* Dimensions of AllSteady-7: 20.87"/530mm (W) x Adjustable 18.11"-20.87"/460-530mm (H) x 12.99"/330mm (D)
* Dimensions of Folded AllSteady-7: 20.87"/530mm (W) x 22.05"/560mm (H) x 4.33"/110mm (D)
* Dimensions of Camera Tray Mounting Width: 227mm (from Left Lever to Right Lever); 231mm (from Left Vertical Tray bracket to Right Vertical Tray Bracket)
* Dimensions of Camera Tray Spacing Height: Adjustable up to 205mm from Lower Camera Mounting Bracket to Upper Carbon Boom Battery Compartment.
* For Camera Mounting Height: Adjustable up to 165mm camera height from Lower Camera Mounting Bracket to Upper Camera Mounting Bracket
* For Camera Mounting Height taller than 165mm: the Camera Tray's Top Boom can be raised with additional washers (not included) and you can also add more weight to the top of the camera to lower CG.
* Dimensions of Camera Tray Spacing Depth/Length: 150mm from tray CG (center of gravity) to back of gimbal,
* Dimensions of Camera Tray Mounting Depth/Length: 130mm from tray CG (center of gravity) to back of gimbal
* For Camera+Lens Mounting Length: 260mm is the estimated maximum camera length that will fit (please see Camera Tray Dimension Mounting Calculation).
* For Cameras+Lens Mounting Length longer than 260mm: You can add more weight to the back of the camera for proper CG.
* Weight of AllSteady-7 Without Battery: 7.7 lbs/3493g
* Weight of 4000mah 4S Battery: .8 lb/363g
* Weight of Joystick Module: .23 lb/104g
* Weight of Monitor Bracket: .17 lb/77g

AllSteady-7 Diagram & Options Reversible Left/Right Handed Joystick Module Monitor Bracket & Articulating Arm Motor Cage & Ultra Resolution Pan-Axis Brushless Motor Toolless Pan-Axis CG Adjustment Aux Electronic Compartment for 2nd Sensor & Optional Aux Power Integrated Battery Compartment Quick Release Camera Top Mount Bracket Adjustment Main Electronic Compartment for 32Bit Alexmos Dual Sensor Controller High Torque Roll-Axis Brushless Motor Triple Carbon Boom Camera Tray (2 Bottom Booms + 1 Top Boom) Toolless Macro-Roll Adjustment Rubber Grip Handle Adjustable in 45° Increments Tilt-Axis Brushless Motor with Anti-Twist Stopper Double Quick Release Micro-Roll Adjustment Lock Quick Release Vertical CG Adjustment Optional Toolless Micro-Roll Adjustment<span style="font-size: small;"> ​

 

[Andy Conrad]

One Year Limited Warranty
AllSteady-7 warranty services and parts support is provided from Turbo Ace's warehouse and showroom located in Orange, California.

• 1 Year Limited Warranty on Parts
• 30 Days Warranty on Parts & Labor
• 30 Days Warranty on Battery
• 30 Days Phone Support

 

[Andy Conrad]