20 Hrs. Batts?

[Giancarlo Bianchi]

Has anyone seen these?

I believe it is a very good option instead of swapping batteries, or dual battery plates.

Is there a way to make it work with the red? Is it stable?

The workpath I`ve found so far is, Cigarrete lighter outlet trough Red Car Charger trough Red charger to Camera. Phewww..

Any comments on this?

 

[Pawel Achtel]

If you look at the specs, these have capacity of around 200Wh at a 20h discharge rate. Considering Red would discharge such batterry in about 2 hours, the 2h capacity would be somewhat less. Probably similar to the original, genuine, small, lightweight and well tested Red Bricks. Why?

Besides, the maximum continuous current is 3.6A which, as you know, is insufficient for Red One.

 

[Alexis Hanawalt]

RED = about 70 - 90W, right? The would result in about 2 hours of battery life.


20 Hr Rate 0.90A (10.8W)
10 Hr Rate 1.60A (19.2W)
5 Hr Rate 2.9A (34.8W)

 

[Mitch Gross]

Lead acid is not a good battery for high discharge use such as the RED One. The internal fuse within these blocks probably wouldn't even allow the draw. If they did I'd be surprised if you got much more than 90 minutes and after about 75-100 cycles they'd likely be worthless.

Not appropriate for RED.

 

[Giancarlo Bianchi]

Thank you guys!!! :sorcerer:

 

[Giancarlo Bianchi]

Not 20Hrs, But Does work

Not 20Hrs, But Does work

Well, I found this on Abel`s page. Waitnig for a quote now.

This is basically what I was looking for.

 

[Brent J. Craig]

Well, I found this on Abel`s page. Waitnig for a quote now.

This is basically what I was looking for.

Those are fantastic batteries. Haven't used them on a Red yet, but they will power an Arri 435 with a Preston FIZ and onboard LCD for at least 13 hours!

 

[Michael Ragen]

Has anyone used their T-Slide?