Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

BUILD 17 Beta

Outputs.

Outputs.

We do understand what is being asked for, and even hesitate to say "sorry" for the RED-ONE, as there a similar things we finally found a path for.

As to the "pick any two" I don't mean pick which two will have graphics on them, that is defined to follow this sequence -

RED-EVF, RED-LCD (which is in effect a second RED-EVF, but scaled) then finally the PVW HD-SDI / HDMI outputs.
 
zeiss master primes

zeiss master primes

Hi
Would the Zeiss Master primes correspond to the i Lens Data Interface


* S4/i Lens Data Interface (requires corresponding Lens Interface hardware)
 
Hd-sdi

Hd-sdi

Is it possible to have the HDSDI without the Look Around
Click to expand...

Well with RGB recording enabled, yes you would have that.

With RAW record the only way that could be done is if all the monitor ports have no Look Around i.e you would lose it on the RED-EVF and LCD outputs too.

In the current mode, you do still get Look Around indicated by the 50% grey shading... and you could add frame guides in your HD-SDI monitor.
 
Stuart English said:
With RAW record the only way that could be done is if all the monitor ports have no Look Around i.e you would lose it on the RED-EVF and LCD outputs too.
Click to expand...

OK.. I understand the problem/challenge.

Stuart English said:
In the current mode, you do still get Look Around indicated by the 50% grey shading... and you could add frame guides in your HD-SDI monitor.
Click to expand...

Can with my Astro (don't think the panny can). Good to know as it might effect peoples purchase decisions.

Also will the HDSDI carry TC?

thanks for answering!

Michael

PS anybody have the link to the wireless TC reader display that has been talked about recently.
 
TC in HD-SDI

TC in HD-SDI

OK.. I understand the problem/challenge.

Also will the HDSDI carry TC?
Click to expand...

We are working on that, but its not very likely to make it into the official Build 17.
 
Jarred Land said:
* Improved JAM SYNC operation : removed requirement to record before syncing.
Click to expand...

Uhh, what does this one mean? So Build 16 required me to hit Record before syncing? Or record some stuff to the drive? This wasn't mentioned in the manual...

Looks like I might be breaking my "no betas" rule... I had problems syncing to my Sound Devices 702T yesterday (idential sync procedure worked fine the day before), so if this fixes it, great!

Or else I'm doing something wrong and am an idiot?

Bruce Allen
www.boacinema.com
 
Timecode JAM SYNC

Timecode JAM SYNC

what does this one mean? So Build 16 required me to hit Record before syncing? Or record some stuff to the drive?
Click to expand...

Yes, in Build 16 and all previous builds, SYNC to external timecode source is achieved by initiating a recording.

On Build 17 we changed that.

As long as JAM SYNC is enabled, we SYNC to external timecode source automatically. No need to record a clip.
 
Stuart English said:
Yes, in Build 16 and all previous builds, SYNC to external timecode source is achieved by initiating a recording.

On Build 17 we changed that.

As long as JAM SYNC is enabled, we SYNC to external timecode source automatically. No need to record a clip.
Click to expand...

Thanks Stuart, looks like we might try going to Build 17.

We got it again today - 3rd time in the day when I jammed from 702T -> RED, the RED was 2 seconds behind (fine the other 2 times). Then I tried jamming from RED -> 702T - still seemed out by a second. Do stuff with camera for 10 minutes, and then it is dead on... I guess we initiated a recording and that caused timecode to sync?

If we hit more problems, we'll try the new build, thanks!

Otherwise, having a ton of fun with your camera in Japan...

Bruce Allen
www.boacinema.com
 
Bruce,
Previous to build 17 the camera did NOT sync at all unless you hit record for a second. Then the camera would sync and all is well. With B17 this has been fixed so that once you connect it syncs.

Hope this helps.
 
digitalfx said:
Bruce,
Previous to build 17 the camera did NOT sync at all unless you hit record for a second. Then the camera would sysnc and all is well. With B17 this has been fixed so that once you connect it sysncs.

Hope this helps.
Click to expand...

This wasn't my experience. ON build 15 when I would plug in the timecode cable it would sync, it just wouldn't show the chains indicating a real sync until we pushed record. I could go in the menu and turn on and off jam sync and watch the timecode change.
 
You must log in or register to reply here.
Back
Top