Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Does the new RED XLR Microphone Cable provide 48v (Phantom power)?

Typically, levels would be adjusted by the mixer using his er..mixer. He (or she) sends 1K tone and sets the levels on the camera to -20. Once the mixer and camera are lined up he sets levels the way he wishes at the mixer, confident that the mixer and camera are set the same. Hopefully, given the reputation our cameras have for sound, he will also be recording to a recorder that would be the primary audio. The audio recorded to camera should be for emergencies only with few exceptions...possibly reality or web stuff.

BrandonChristensen said:
There's no way to adjust levels while you're shooting is there?
Click to expand...
 
Arnold F. said:
Typically, levels would be adjusted by the mixer using his er..mixer. He (or she) sends 1K tone and sets the levels on the camera to -20. Once the mixer and camera are lined up he sets levels the way he wishes at the mixer, confident that the mixer and camera are set the same. Hopefully, given the reputation our cameras have for sound, he will also be recording to a recorder that would be the primary audio. The audio recorded to camera should be for emergencies only with few exceptions...possibly reality or web stuff.
Click to expand...
I do a lot of stuff where I'm running my own audio and have to do quickturn edits. While I have a Zoom H4n, I'd prefer to not use it.

Can I just tap the levels and adjust on the fly if need be? Or is it a set it, record, change after cutting?
 
BrandonChristensen said:
I do a lot of stuff where I'm running my own audio and have to do quickturn edits. While I have a Zoom H4n, I'd prefer to not use it.

Can I just tap the levels and adjust on the fly if need be? Or is it a set it, record, change after cutting?
Click to expand...

Yes you can change the pre-amp gain ( a.k.a levels ) during record....
 
Dave Blackham said:
Dont think line level exists yet. The other odd thing is if the camera is powered down, the audio 3.5mm jack needs to be dissconected and re connected for the audio in to become active again. I hope this gets fixed soon.
Click to expand...

Yes we are investigating that issue.....

Line level input is not available on the Brain, that's a function for the PRO I/O module.
 
You must log in or register to reply here.
Back
Top