Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

REDCINE Information

I try to unzip the File and get all the time the same error:
Archive Utility
Unable to unarchive "RedCine060_zip"into Desktop
(Error 22- Invalid argument.)

Does anyone else has the same problem or is my computer- Macbook pro
Please advise
Panos
 
Panos Bournias said:
I try to unzip the File and get all the time the same error:
Archive Utility
Unable to unarchive "RedCine060_zip"into Desktop
(Error 22- Invalid argument.)

Does anyone else has the same problem or is my computer- Macbook pro
Please advise
Panos
Click to expand...
I had the same problem on my mbp, I just waited till everything else had downloaded and then downloaded redcine on it own, seemed to work don't know why.
 
I STRONGLY suggest a REDCINE section on the forum - and a sticky of KNOWN ISSUES -

now that the beta is "public" - this forum is gonna light up like a Christmas tree -

this is still, IMHO, very BETA -

for example:

REEL # do NOT transfer to rendered QT yet (same as RedAlert w/wrappers)

We have interns manually entering Reel numbers ALL DAY LONG in FCP (which does re-write the meta-data) - so, we will keep howling for that - without it - EDL is useless.

I just hope that time and energy of the REDCINE team is first spent on feedback and bugs - not answering tons of basic questions because thorough documentation does not yet exist.

It's gonna be AWESOME - I just fear many folks will not heed the "do not use on commercial project" warning -

Play with it - try to break it - report bugs - welcome to beta-ville
 
flameop said:
Mark,

Good points.

So when you re name the reels in fcp that are your prores renders? or the Wrapped r3d files?
Click to expand...

wrappers AND 1K prores renders - we are testing several workflows at the same time over here -

flameop said:
When you then export your EDL.. what are you using to conform ?


s
Click to expand...

SCRATCH SCRATCH SCRATCH

But you can conform in FCP from EDL as well.
 
No way for me, same error even now that it is the only file to download. Anybody... We also want to play guys...
 
I keep getting "application not supported on this system"
PowerPCG4 OSX 10.4.10

Any advice?
 
luki said:
Unfortunately, you are correct. Although you may be worthy, your computer is not. Embedded ATI mobo gfx on XP are not great for GPU-enhanced OpenGL apps. Not a lot of goodness there.

You will probably be able to see R3D clips, but not do any color manipulations.

Stroll down to Best Buy tomorrow and spend a few hundred for a Quadro card of some kind and things will improve. Grand Theft Auto will run better too.

Lucas
------
ASSIMILATE, Inc.
LA, CA, USA
Click to expand...

Hey Lucas,

Would you be willing to suggest a good-better-best list of graphics cards? I know that the MaxCube has a Quadro FX 5500 SDI as part of the package, but is a lesser Quadro (3500, 4500) also acceptable? Is there a decent "entry" level that you would recommend as a starting point?

Thanks,

Kevin
 
Concrete said:
REDCINE may be beta but works flawlessly as far as I've seen. My only little complain is that the swipe menus are not appearing and disappearing too fluently in my computer.
Click to expand...

Are you using a Wacom? In that case I think it's recommended to slightly shrink your screen area in all directions in the Tablet Properties. So you don't have to swipe all the way to the end of the tablet before the menus appear/disappear. This is actually a Scratch "tip" but I believe it could be related...:wink:
 
I've got a Quadro FX 1300 and get the following errors

16:39:30.26 WARN : Shader: 1D LUT texture(1) failed..: OpenGL Error - Invalid enumerant
16:39:30.26 WARN : Shader: 1D LUT texture(2) failed..: OpenGL Error - Invalid enumerant

I can see the image with colour correction turned off, but not with it turned on. I can't export etc.

Ben



khmuse said:
Hey Lucas,

Would you be willing to suggest a good-better-best list of graphics cards? I know that the MaxCube has a Quadro FX 5500 SDI as part of the package, but is a lesser Quadro (3500, 4500) also acceptable? Is there a decent "entry" level that you would recommend as a starting point?

Thanks,

Kevin
Click to expand...
 
Redcine shot operations

Redcine shot operations

Redcine is an awesome app... not an original line I know, but damn I'm loving it.
I do have a question possibly will be resolved in future builds but for the time being a question none the less. The display guide settings in the project settings menu give the option of selecting the time code to be displayed bellow the frame display in the view port. The frame option out of the drop down menu will display a frame count from the entire time line not of individual clips. In the shot settings of the shot menu the in/out options relate to the frames of individual clips not as part of an entire time line frame count. So there is no way to correspond the frame number displayed in the in/out points of the shot settings menu to the frame numbers in the view port. This is when a few clips are in the time line that is.
Or is there? Am I missing something?
 
REDcine output filters

REDcine output filters

Jarred Land said:
The tutorials at the bottom of Brents post are a great way to get up to speed quickly... i suggest you all take a swing at them.
Click to expand...

Hi Jarred,

I'm getting ready to grade this music video and I wanted to know if there is a list of what each of the output filter do in RedCine anywhere.

I just want to make sure I understand each one.

Did a couple of searches and couldn't find any specific info.

Thanks.
 
You must log in or register to reply here.
Back
Top