Welcome to our community

Be a part of something great, join today!

Log in
  • Hey all, just changed over the backend after 15 years I figured time to give it a bit of an update, its probably gonna be a bit weird for most of you and i am sure there is a few bugs to work out but it should kinda work the same as before... hopefully :)

Red One Pipeline Diagram v1.0

You're a genius....

One thing (of course), do you want to differentiate between Sata 1 for REDDRIVE/REDRAM and Sata 2 for REDFLASH or RAWPORT?

Cheers and thanks, your diag has helped many

DF
 
Andrew said:
I think some RAM FLASH option is mutually exclusive with RAW data port.
Click to expand...

Yep. If you look at the RED One block, you'll note the word "-OR-" between "e-SATA" and "RAW". Maybe I should make it bigger. ;-)

david farland said:
...do you want to differentiate between Sata 1 for REDDRIVE/REDRAM and Sata 2 for REDFLASH or RAWPORT?
Click to expand...

Hmm. It doesn't matter to the RED One itself. I could add the labels to the drives, I suppose.
 
The red drive and red ram goes to the sata port and is always enabled.

The other flash options are interchangable with each other or factory interchangable with the raw port, and are not connected to the sata bus connector.
I think you should add a small square that reads camera expansion port, with the options of the raw port and each of the flash ports (CF, expresscard or 32GB 1.8" sata)
 
Mike,
The camera will have 2 sata ports.

As Anders says, one for the REDDRIVE & REDRAM which is always enabled.
The 2nd sata port will be to drive the sata flash unit.
This 2nd sata port shares the same physical location as the optical RAW PORT and will be disabled if you install the RAW PORT.

Also I'm 'secretly' hoping we could do some extra stuff like:
Backup the flash units to the RED DRIVE.
Install the RED DRIVE in the 2nd sata port to backup REDRAM
Install 3rd party sata drives in 2nd sata port for backup.

Cheers,
DF
 
david farland said:
Mike,
The camera will have 2 sata ports.

As Anders says, one for the REDDRIVE & REDRAM which is always enabled.
The 2nd sata port will be to drive the sata flash unit.
This 2nd sata port shares the same physical location as the optical RAW PORT and will be disabled if you install the RAW PORT.

Also I'm 'secretly' hoping we could do some extra stuff like:
Backup the flash units to the RED DRIVE.
Install the RED DRIVE in the 2nd sata port to backup REDRAM
Install 3rd party sata drives in 2nd sata port for backup.

Cheers,
DF
Click to expand...


RAW port is more then 3 times faster then SATA
I was hoping that some memory options installed instead of high speed port will let us record RAW (not REDCODE RAW) That is why it is factory installed option for high speed port or high speed flash, not both.
I know, I know RAW clicks at ~1.055GBytes/sec but still, with current technology you could get 2 minutes out of 120GB flash.
 
Andrew,

Flash may have the memory size but it's i/o doesn't have that 1GB/sec bandwidth.
DF
 
Just a slight correction. The EVF and LCD are connected to a custom multipin connector. The image connection is based on DVI.

You might want to edit your very first post to the most recent diagram...
 
Hdmi

Hdmi

HDMI is 720p irrespective of the optical format or resolution / frame rate you are shooting... think of it as a HD video equivalant of a video assist on a film camera.
 
REDFLASH records the same kind of information as RED-DRIVE, so I don't think you need a different line or something on the chart for that.

More questions about the RAW port can be answered by Stuart. As far as I know that does not connect to a PC. You connect to RED-RAID which you can also connect to a PC (similar to RED-DRIVE).
__________________
Code Chef @ RED
www.RED.com


RED RAID RED RAID!!!!...danny isn't here any more mrs. torrance....

sorry could not resist.

When will we get specs about red raid? Is it still in R&D?
 
Mike,

I don't envy you having to put this shit together...........

Stuart...Do you mean Mike should be labelling the evf/lcd outputs as 720p?

Phaz, the extra sata line (channel) to RED-FLASH is to reflect when you install RAW o/p, you disable this extra sata line to the RED-FLASH but keep the original REDDRIVE sata line.
 
Single link HD-SDI is there for monitoring also. Dual-link HD-SDI for recording (if you want to) or clean feed monitoring. So that's a total of three HD-SDI connectors on the body.
 
Rob Lohman said:
Single link HD-SDI is there for monitoring also. Dual-link HD-SDI for recording (if you want to) or clean feed monitoring. So that's a total of three HD-SDI connectors on the body.
Click to expand...

Rob,

Are there two HD-SDI ports, one for the EVF and on for LCD? Plus the Dual-link?

Michael
 
EVF & LCD are DVI based, besides that there are three HD-SDI connectors.
 
EVF & LCD Availability

EVF & LCD Availability

Rob:

Do you know where we are on the production timeline for the LCD - i.e. is it available now - or will be sooner than the cameras. I manufacture underwater housings and would like to get my hands on the LCD sooner so that we can make a separate case for the LCD, and in some ways this takes longer than making the initial housings for the camera itself.

Also we would like to be some sort of dealer/systems integrator - at least for the accessories (I know they have initially resisted having dealers for the camera) and wondered which team member would be in charge of that sort of thing.

Rob Lohman said:
EVF & LCD are DVI based, besides that there are three HD-SDI connectors.
Click to expand...
 
I don't know, I'm on the tech team. Suggest you shoot an email to 4k@red.com with your inquiry!
 
Just to summarise!!

1. RED CAMERA A/V OUTPUTS
- HDMI x 1
- E-SATA x 2
- HD-SDI Dual x 1
- HD-SDI Single x 1
- Mini XLR input x 4
- Mini XLR output x 1
- 10Gb ethernet (single mode) fibre port x 1

2. CAMERA LIVE OUTPUTS
- EVF = 720p video with look around, frame markers and other graphics
- RED LCD = 600p video with look around, frame markers and other graphics
- HDMI = 720p video plus audio without graphics
- HD-SDI x single = 720p video plus audio without graphics
- HD-SDI x dual = 1080p clean signal

3. CONTROL
- SD card (settings & wi-fi [802.11] control)
- USB x 1
- B4 Lens interface?

4. POWER
- Input= ?
- Output = 2 unregulated 11.5-17V (battery pass through) Lemo outlets


5. RED STORAGE MODULES OUTPUTS
RED DRIVE/ RED RAM
- FW 400/800
- USB 2
- eSATA (power required)

RED (EC) FLASH
- FW 400/800
- USB 2

RED 1.8” SATA FLASH
- eSATA


6. RED-CINE
- White balance (Kelvin / tint)
- Saturation
- Gain
- Exposure
- Brightness
- Shadow
- Contrast
- Curves
- Output gamma
- Resizing, cropping & positioning

Cheers,
DF
 
You must log in or register to reply here.
Back
Top