Cap on Monitor Cable

[Moses Pan]

So...one of the caps for the monitor cables went missing. The wires are exposed and I'm scared that it might get damaged. Any tips? Thanks!

 

[Tim Morten]

I had the same problem. Bomb Squad kindly sent me the following info:

LEMO part number for the back nut is FLA.1E.140.LC

http://www.mouser.com/ProductDetail/LEMO/FLA1E140LC/?qs=6bLPSfSr4Vk9PnM/3GI0TQVVJzDumoVd
http://estore.heilind.com/partdetail.asp?pn=FLA.1E.140.LC&dp=LEMFLA.1E.140.LC&cp=

Worked like a charm...

 

[Eric Haase]

Thanks for posting this. Same thing JUST happened to my monitor cable. Ordered one from mouser.com.

 

[Alexander Thomson]

Must admit I have been looking for these as well. Thanks!!

 

[Moses Pan]

Thanks!!! Much appreciated.

 

[Elizabeth Lowrey]

I had the same thing happen, lost the screw-on cap that fits over the back of the elbow connector on the right angle to right angle LEMO cable that ships with the 5" Touch LCD. Can someone verify absolutely that the part numbers in this thread will work? A previous thread I found indicates different part numbers.

 

[Tim Morten]

Definitely worked on my right angle cable for the Touch 5.0.

Cheers,
Tim

 

[Elizabeth Lowrey]

Definitely worked on my right angle cable for the Touch 5.0.

Cheers,
Tim

Thanks for the confirmation, Tim. Will order a couple tomorrow.

 

[Paul Toth]

Here's a handy guide for determining which lemo you have:

http://intra.lemo.ch/faqs/Quick_Reference/plug_id_guide.pdf

I'm trying to replace just the sleeve on my LCD right angle cable. The cap, cable and plug are fine but the sleeve is squished...

 

[Moses Pan]

Received mine in the mail today from Mouser. It fits perfectly! Thanks everyone!