Lemo cable fell apart

[Chris Tharp]

After climbing down from a tree stand some how my Lemo cable feel apart. I'm trying to figure out if I have all the pieces and how to screw it all back together.

Attached is a picture and if anyone can point me in the right direction to screw it back together cause I'm afraid of doing it wrong mess something up.

 

[Curt von Badinski]

http://www.lemo.de/downloads/misc/cable_fixing.pdf
Have a look at page 11. Looks like you're missing the lower half of the inner shell.

 

[Konstantin Silakov]

 

[ericyoung]

The inner shell with the keying prongs at the end match the keying cutouts on the cable clamp, the raised key on the plastic contacts moulding, and an internal key on the outer shell (which in turn is in line with the red dot on the outside of the shell).
All the above keys should line up to make sure the pins are in the correct orientation when assembled.

You are indeed missing the other half of the inner shell - the one without the keying prongs at the bottom right of the last picture in Konstantin's helpful post.

Obviously when assembling, the inner shell should not contact any of the pins or wires, especially if they don't have sleeving or heatshrink over them like the ones in Konstantin's pics.

 

[Jason Comparetto]

Hi Chris, if after trying to re-assemble it you have some trouble, feel free to send it in. We might have some spare lemo parts laying around in case you can't find the missing piece. Contact me at jason@CinemaOxide.com

 

[Chris Tharp]

Thanks everyone for your quick responses i was pretty surprised. sorry for taking so long to respond ive been out in the wilderness.with sparse internet access.

@Konstantin Silakov thanks for the pictures that made alot more sense then digging through that pdf.

@jasoncomparetto im going to be contacting you shortly.