Mark Pedersen
Well-known member
- Joined
- Aug 15, 2007
- Messages
- 1,246
- Reaction score
- 0
- Points
- 0
We’ve taken possession of our Stage 2 EPIC X so we are reluctantly selling our RedOne MX, SN 1545.
This is an opportunity to own a PRISTINE RedOne MX. I own a production company and the original owner. The camera was purchased for our own corporate projects and never rented out. It has been very well cared for—never abused or used in hostile environmental conditions. Body has no dings or visible wear. It was outfitted with the ET breakout box and topside combo cheese plate from the beginning.
The camera only has 232 hours on it (far less on the MX sensor) and it has performed flawlessly. The only problem we experienced was a power board failure this past October. We sent the camera to RED and they replaced the power board. The camera was checked out thoroughly at the time and was perfect. Camera has been shot one day since then. Both drives have been updated and the FW 800 ports are functioning perfectly. LCD is perfect, no scratches. With Red’s transfer of ownership you will receive a 3-month warranty. Camera is located in San Francisco.
This is an awesome ready-to-shoot package with a lot of extras and a custom Innerspace ATA case. The only thing we are hanging on to is our Red bricks for our EPIC. Bricks are readily available used or on Red.com. Please note some items listed aren’t shown in the group photo. Photos are available of individual items.
Here’s the list of the gear we are selling as a complete package, with original retail price.
1x RED MX with PL mount, body cap - $25,000.
1x Red CF Module - $500.
1x 5.6" LCD - $1,700.
1x LCD cable - $180.
2x MiniXLR to XLR Audio Cables - $100.
1x Top handle - $150.
1x Top Handle Extension - $175.
1x Red Bottom Plate
1x Red QuickPlate - $500
1x Red 19mm Shoulder Dovetail- $550.
1x Focus hook set - $45.
2x Red Handle (L+R) - $500.
1x Red Handle Mount - $150.
2x Red Side Handle - $400.
2x 12" 19mm steel rods - $80.
1x ET Top Side Combo Cheese Plate (19mm top mounts) - $710.
2x ET short handle riser - $60.
1x ET Breakout Box - $580.
1x ET Red 19mm Arri Bridge Plate - $900.
1X RED 5" Noga Arm for LCD - $120
1x Red Charger / AC Adapter - $550.
2x 16GB RED CF Cards - $990
4x 8GB RED CF Cards - $600
2x CF Pelican Case - $40.
1x Innerspace Custom Cut Red Case - $450.
2x 320G RED Drives with AC cables - $1,800.
1x RED Cradle - $750.
2x Drive Cables - $400.
Total New - $36,690.
ASKING PRICE - $17,000.
We are also selling the following items separately:
1x Red EVF - $2,950.00 new, $1,700
(entire board set was just replaced — essentially a new EVF, no dings)
1x EVF cable - $180.00 - $90
1x ET Ultralite 15mm Lightweight Rod Adapter $240.00 new. $200 (never used!)
1x ET Red 15mm Arri Bridge Plate (studio) - $600.00 new - $350
If you’d like the complete package, we’ll cut a deal:
$18,500 for the whole shootin’ match!
Please post if you are interested and email Mark at mpedersen@pedersen.com
Thanks all!
M
This is an opportunity to own a PRISTINE RedOne MX. I own a production company and the original owner. The camera was purchased for our own corporate projects and never rented out. It has been very well cared for—never abused or used in hostile environmental conditions. Body has no dings or visible wear. It was outfitted with the ET breakout box and topside combo cheese plate from the beginning.
The camera only has 232 hours on it (far less on the MX sensor) and it has performed flawlessly. The only problem we experienced was a power board failure this past October. We sent the camera to RED and they replaced the power board. The camera was checked out thoroughly at the time and was perfect. Camera has been shot one day since then. Both drives have been updated and the FW 800 ports are functioning perfectly. LCD is perfect, no scratches. With Red’s transfer of ownership you will receive a 3-month warranty. Camera is located in San Francisco.
This is an awesome ready-to-shoot package with a lot of extras and a custom Innerspace ATA case. The only thing we are hanging on to is our Red bricks for our EPIC. Bricks are readily available used or on Red.com. Please note some items listed aren’t shown in the group photo. Photos are available of individual items.
Here’s the list of the gear we are selling as a complete package, with original retail price.
1x RED MX with PL mount, body cap - $25,000.
1x Red CF Module - $500.
1x 5.6" LCD - $1,700.
1x LCD cable - $180.
2x MiniXLR to XLR Audio Cables - $100.
1x Top handle - $150.
1x Top Handle Extension - $175.
1x Red Bottom Plate
1x Red QuickPlate - $500
1x Red 19mm Shoulder Dovetail- $550.
1x Focus hook set - $45.
2x Red Handle (L+R) - $500.
1x Red Handle Mount - $150.
2x Red Side Handle - $400.
2x 12" 19mm steel rods - $80.
1x ET Top Side Combo Cheese Plate (19mm top mounts) - $710.
2x ET short handle riser - $60.
1x ET Breakout Box - $580.
1x ET Red 19mm Arri Bridge Plate - $900.
1X RED 5" Noga Arm for LCD - $120
1x Red Charger / AC Adapter - $550.
2x 16GB RED CF Cards - $990
4x 8GB RED CF Cards - $600
2x CF Pelican Case - $40.
1x Innerspace Custom Cut Red Case - $450.
2x 320G RED Drives with AC cables - $1,800.
1x RED Cradle - $750.
2x Drive Cables - $400.
Total New - $36,690.
ASKING PRICE - $17,000.
We are also selling the following items separately:
1x Red EVF - $2,950.00 new, $1,700
(entire board set was just replaced — essentially a new EVF, no dings)
1x EVF cable - $180.00 - $90
1x ET Ultralite 15mm Lightweight Rod Adapter $240.00 new. $200 (never used!)
1x ET Red 15mm Arri Bridge Plate (studio) - $600.00 new - $350
If you’d like the complete package, we’ll cut a deal:
$18,500 for the whole shootin’ match!
Please post if you are interested and email Mark at mpedersen@pedersen.com
Thanks all!
M
