Thread: Perfect Condition! Flanders Scientific CM171 HD Monitor with Sunshade Soft Case!

Closed Thread
Results 1 to 2 of 2
  1. #1 Perfect Condition! Flanders Scientific CM171 HD Monitor with Sunshade Soft Case! 
    Flanders Scientific CM171 HD Monitor Field Package (without Vesa Mount)

    (1) Flanders Scientific True 10 Bit Native 1920x1080 Resolution 17.3" Broadcast Monitor
    (1) Chassis Mount Anton Bauer Battery Adapter Upgrade (w/ P-Tap to 4-Pin Cable)
    (1) FSI Solutions Carrying Case / Sunshade
    NOTICE: Case top flap inside plastic is cracked in a few places! Still closes and acts as sunshade. Just is not as rigid as stock.

    (1) Screw-On Clear Protective Screen Cover (w/ screws)
    (1) Power Cable

    Valued at $3000 + shipping. Get this like new monitor at a great price!

    $2750 including shipping!

    * Any item not pictured will not be included unless otherwise stated
    Does not include Vesa Mount or table mount but you can use the Carry Case as a table stand.


    Product Description
    This Flanders Scientific CM171 Monitor Field Package is in LIKE NEW CONDITION. Comes with all accessories pictured

    - CM171 Monitor Screen is in immaculate condition! No scratches or marks! Just a little dust
    - Screen protector has some minor signs of wear and residue from sticker
    - Bag's top flap - inside plastic panel is cracked in a few places (see photos) Still functions as a sunshade.


    Our best selling monitor, the CM171 is an extremely capable, light-weight, power-efficient, and color accurate monitor. This unit is equally at home in the field, a post production suite, or an equipment rack.

    Color Management

    FSI’s 2nd generation Color Fidelity and LUT Interpolation Engine (CFE2) houses multiple 4,913 point (173) calibration and DIT (look) LUTs for highly accurate color reproduction and effective look management. Instantly select from Rec709, EBU, SMPTE-C, DCI P3, Rec2020 Emulation*, Native Wide Gamut, and Custom User Generated color spaces.

    Additional gamma, peak luminance, and color temperature toggles further add to the versatility of the CM171.

    All CFE2 equipped monitors also feature an easy to use menu toggle to instantly switch between data (full) range monitoring or video (legal) range monitoring modes.


    FSI monitors come pre-calibrated from the factory and free recalibration is always available for customers that would like to send their units in to an FSI service department.

    Quickly and easily perform your own 3D LUT based calibration with advanced color management solutions like LightIllusion's LightSpace CMS or SpectraCal's CalMAN.

    DIT LUTs

    Upload and store up to 16 3D DIT LUTs and instantly toggle between them using the up and down buttons.

    Video Scopes

    Display up to two scopes on screen at a time. Scopes can be positioned in any of 6 on screen positions. When using two scopes the scope windows can be stacked horizontally or vertically depending on your preference. Video scopes work across all inputs, even DVI.

    Adjustable Waveform

    Scope intensity is adjustable and waveform scale can be shown in IRE, millivolt, or digital levels. Levels above or below 100IRE are shown in red for easy identification.

    Audio Meters

    This monitor features several audio metering tools as well as the ability to disembed any single channel or stereo pair of audio to the monitor’s internal speakers or audio line out. Disembedded audio is always delayed by the exact amount of video processing time to ensure proper lip-sync.

    Horizontal Audio Level Meters
    Display 2, 8, or 16 channels of audio arranged in audio groups or stereo pairs with real-time numerical display of dB levels per channel. Meters feature adjustable Alignment Level, Permitted Max Level, and Peak Hold Time. Select between True Peak, PPM Type I, or PPM Type II ballistics. Meters will indicate NO DATA if an audio group is not embedded in the signal to differentiate it from audio channels that may be mute, but still embedded.

    Vertical Audio Level Meters
    16 channel audio level meter display with adjustable Alignment Level, Permitted Max Level, and Peak Hold Time. Select between True Peak, PPM Type I, or PPM Type II ballistics. Meters will indicate NO DATA if an audio group is not embedded in the signal to differentiate it from audio channels that may be mute, but still embedded.

    CIE Scope

    A dedicated function that maps full frame signal data onto your choice of CIE1931 x,y or CIE1976 u’,v’ diagrams. Signal information is shown relative to your active color space and can be compared to a selectable secondary color gamut.

    Video Data Analyzer

    Provides real-time readout of video data at the pixel level in your choice of decimal or hexadecimal values. Can show pixel level information as YCbCr or RGB as well as 8bit or 10bit.

    This feature can be used in combination with the H/V delay mode for horizontal and vertical blanking data analysis.


    Choose from a wide assortment of standard markers and safety areas that can be displayed as lines, translucent overlays, or solid overlays. Lines and overlays have selectable colors for instant customization.

    Don't see the marker you need here? Send it to us as a 1920x1080 .bmp file and we can add it in a future firmware update.

    Onscreen Alarms

    Allows for unobtrusive signal monitoring with alarm window only appearing in case an actual alarm condition is met. Available alarms include adjustable IRE threshold exceeded, RGB legal levels exceeded, video black or video blue on screen for extended time, audio loss with adjustable time-without-audio trigger setting, and audio out of phase warning.

    Pixel Mapping

    Allows for 1:1 and 2:1 pixel mapping of sources when their resolution is different than the native resolution of the panel.

    This feature is also capable of scaling 2K signals to fit or be shown 1:1 with the ability to move left to right so any portion of the 2K image can be shown 1:1.

    Zoom Modes

    Pixel Zoom: For HD signals. Allows for highly adjustable artifact free zoom on any section of the image.

    Zoom: For letterboxed SD content. Zooms in while preserving aspect ration so that a 16:9 portion of the SD image is scaled full screen.

    DSLR Zoom: Scales DSLR output so that only the portion of the image that will actually be captured to video is show. Works with both SD and HD DSLR output.

    Full Screen: Stretches the incoming signal to fill screen, built for use primarily with rasterizers that output 1024x768 signals intended to be stretched to 16:9 by a connected display.

    XS Scale: Centered and zoomed-in display of the gate check output from a Codex ARRIRAW Recorder. This allows for easy fullscreen monitoring of the gate check output.

    Overscan: 5% Overscan Display.


    Panel Specs:
    Screen Size 17.3"
    Resolution 1920x1080
    Bit Depth (Color) True 10bit (1.073 Billion Colors)
    Contrast Ratio 1000:1
    Backlight RGB LED
    Pixel Efficiency 99.999%
    Max Luminance 250nit
    Viewing Angle 178°

    1 x DVI-I DVI-I (Analog/Digital)
    2 x BNC 3Gbps/Dual Link/HD/SD-SDI
    1 x BNC Composite
    3 x BNC Component (YPbPr/RGB)

    2 x BNC 3Gbps/Dual Link/HD/SD-SDI
    1 x BNC Composite
    3 x BNC Component (YPbPr/RGB)

    Supported SDI Formats:
    ITU-R BT.656 (PAL) 576i (50)
    SMPTE-125M 480i (59.94)
    1080i (60/59.94/50)
    1080p (30/29.97/25/24/24PsF/23.98/23.98PsF)
    SMPTE-296M 720p (60/59.94/50/30/29/25/24/23.98)
    2K 2048x1080 (30p/30PsF/29.97p/29.97PsF/25p/25PsF/24p/24PsF/23.98p/23.98PsF)
    SMPTE-372M 1080p (50/59.94/60) 4:2:2 YCbCr, RGB
    1080i (29.97/25/24/23.98) 4:4:4 YCbCr, RGB
    1080p (30/29.97/25/24/23.98) 4:4:4 YCbCr, RGB
    720p (60/59.94/50) 4:4:4 YCbCr, RGB
    - Level A & Level B supported
    - Level B supports 2 x SMPTE
    292M image format mapping
    372M image format mapping
    - RGB, YCbCr, & XYZ supported 12 & 10bit 4:2:2 1920x1080p (60/59.94/50)
    4:4:4 1280x720p (60/59.94/50/30/29.97/25/24/23.98)
    12 & 10bit 4:4:4 1920x1080i (60/59.94/50)
    12 & 10bit 4:4:4 1920x1080p (30/29.97/25/24/24PsF/23.98/23.98PsF)
    12 & 10bit 2k (2048x1080)(30p/30PsF/29.97p/29.97PsF/25p/25PsF/24p/24PsF/23.98p/23.98PsF)

    *XYZ mapped to Selected Color Gamut on Color Management Menu

    Supported DVI-I Formats:

    DVI-Analog & DVI-Digital VGA (640x480), NTSC (720x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024)
    DVI Digital Only 1280x720, 1440x900, 1920x1080

    Audio Disembedding Yes
    Audio Level Meters Yes
    Internal Speakers 2
    Audio In (Mini-Jack) 1
    Audio Out (Mini-Jack) 1

    Rack Mount Kit Optional
    Desktop Stand Standard
    External Mounting Points 100mm VESA
    VESA to Light Stand Mount Optional
    Carrying Case with Integrated Hood FSI Solutions CH17
    Clear Protective Cover Optional
    On-Screen Scopes Yes
    Measurement Function Yes
    Timecode Display (SD/HD-SDI) LTC, VITC 1, VITC 2
    Color Fidelity Engine Yes
    1:1 Pixel Mapping Yes
    Blue Only & Mono Mode Yes
    Side by Side Monitoring Yes
    3D LUT Color Space Selection SMPTE C/EBU/REC709/REC2020 Emulation/DCI-P3/USER
    Color Temperature Select 3200K, 5000K, 5600K, 6500K, 9300K
    Gamma Selection 1.0 / 1.8 / 2.0 / 2.2 / 2.35 / 2.4 / 2.6 / 2.8

    AC Input IEC / C14
    DC Input 4 PIN XLR
    Battery Plate Optional
    Power Requirement 100~240 VAC / 12 VDC
    DC Power Consumption (Appx.) 28 Watts

    Weight (without stand) 6.4 lbs (2.9 kg)

  2. #2  

Tags for this Thread

View Tag Cloud

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts