Thread: Filming near an MRI. . .

Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1 Filming near an MRI. . . 
    Hey all. . .

    Has anyone tried to use their RED One inside a room with an MRI? I'm not talking about an MRI in operation, which I'm sure would be dangerous, but an MRI machine.

    We have a scene in our new feature where a dying man goes into an MRI machine. We'll, we need to know if it is even possible before we make the "final arrangements," as it were.

    Any thoughts?

    Thanks.

    Stephen
    RED One M-X "Lewis" (#791)
    First feature film, Works in Progress, out on DVD (Vanguard Cinema).
    Second feature film, Terminal, now in post-production in Kansas City and scheduled for a late 2013 release.
    Third feature film, Dust, currently in pre-production and scheduled for production during summer 2014.
    Reply With Quote  
     

  2. #2  
    Senior Member
    Join Date
    Jul 2010
    Location
    Stamford CT
    Posts
    964
    While were at it, does it damage the sensor of a red to shoot into a microwave that is running? I am working on a cooking show as a DIT and want to buy there red, but I am not sure if the the microwave close ups might of effected the sensor chip.... Thanks!!!
    Reply With Quote  
     

  3. #3  
    Senior Member Leo Ticheli's Avatar
    Join Date
    Apr 2007
    Posts
    816
    I believe an MRI is ALWAYS on. Beware. Or dust off your film camera.

    Good shooting and best regards,

    Leo
    Leo Ticheli
    Director/Cinematographer
    Reply With Quote  
     

  4. #4  
    Member
    Join Date
    Oct 2011
    Location
    Brooklyn, NY
    Posts
    80
    There are large permanent magnets in an MRI. I volunteered to help a a friend with a project, and it involved a couple MRI's. The tech (with a Ph.D in nuclear physics!) took his ID badge, which was on a little tether with a tiny piece of metal, and held it in the air about 3 meters away. The thing snapped to attention and hung in the air.
    Just google 'MRI accidents'. I would probably try shooting through the window, if possible...
    -Nick Timmons
    Pamoramic Digital Cinema
    Epic-M #1290 'Ruth'
    Brooklyn, NY
    Reply With Quote  
     

  5. #5  
    Senior Member
    Join Date
    Jul 2009
    Posts
    2,316
    That's a great question Stephen. I'll be watching this space for answers. I would expect that the machine is well shielded outside the target area, but I know no facts as to short term exposures and safety procedures within the area of operation.

    Brian, I'm sure a little distance would be a simple and adequate answer to your concerns. Do you have lenses long enough to get you to where you feel safe?
    Reply With Quote  
     

  6. #6  
    Senior Member
    Join Date
    Jul 2010
    Location
    Stamford CT
    Posts
    964
    The camera is a good 4-6 feet from the microwave...its got a cooke zoom on it... before I buy it I started to worry what the frequencies I cannot see might be doing to it..
    Reply With Quote  
     

  7. #7  
    Senior Member
    Join Date
    Jul 2009
    Posts
    2,316
    Quote Originally Posted by Brian Merlen View Post
    The camera is a good 4-6 feet from the microwave...its got a cooke zoom on it... before I buy it I started to worry what the frequencies I cannot see might be doing to it..
    Only 6 ft.? What lens is it? It might be better to consider longer glass for close ups in general, not just the microwave.
    Reply With Quote  
     

  8. #8  
    Member
    Join Date
    Oct 2011
    Location
    Brooklyn, NY
    Posts
    80
    Every microwave I've ever seen has a Faraday cage (the metal mesh) around the whole thing to prevent microwaves from escaping the interior. Of course, they simple don't work that well. Put a 2.4 GHz cordless phone into the microwave, and you can still make a call to it. 2.4 GHz is the domain of microwaves.
    -Nick Timmons
    Pamoramic Digital Cinema
    Epic-M #1290 'Ruth'
    Brooklyn, NY
    Reply With Quote  
     

  9. #9  
    Senior Member
    Join Date
    Feb 2007
    Location
    Austin,TX
    Posts
    1,287
    As nick says, google "MRI accidents" and you'll see why you can't be in the room. You can shoot through the door or through the window but the tech will not let you any closer ( and you don't want to go any closer). They always have a magnetic charge, even when off.
    http://mrimetaldetector.com/blog/200...dent-pictures/
    http://shanefkelly.com
    Epix-X#607

    Wise men talk because they have something to say; fools, because they have to say something.
    Plato (427 BC - 347 BC)
    Reply With Quote  
     

  10. #10  
    Senior Member Stephen Williams's Avatar
    Join Date
    Dec 2006
    Location
    Europe
    Posts
    3,880
    Quote Originally Posted by Stephen Pruitt View Post
    Hey all. . .

    Has anyone tried to use their RED One inside a room with an MRI? I'm not talking about an MRI in operation, which I'm sure would be dangerous, but an MRI machine.

    We have a scene in our new feature where a dying man goes into an MRI machine. We'll, we need to know if it is even possible before we make the "final arrangements," as it were.

    Any thoughts?

    Thanks.

    Stephen


    My Epic survived, one of the first shoots I did with it!
    Attached Images
    Epic M owner
    Reply With Quote  
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts