MArshall 7" SDI input issues

[John Brennick]

http://www.filmtools.com/marshall-7-...att-mount.html

This is the monitor that I have and I have been using via hdmi with my dslr. Since I got my scarlet and crane I've been meaning to set this up as the Crane monitor via sdi. Now I'm not 100% certain but would hd-sdi and sdi work together? i set hd-sdi out on the scarlet as the feed and it was definitely sending a signal to the monitor because the monitor would flash "component NTSC" and then say "no signal" but would never show an image. The monitor works fine via hdmi, but it doesnt via the hd-sdi. Is there something I'm doing wrong or is hd-sdi and sdi not compatible. I'm currently on build 3.2.13. Thanks in advance for your help.

Best,

-John Brennick

[John Brennick]

Has anyone else had this problem?

[Nick Shaw]

Slightly confused when you say you have been using the monitor via HDMI, as the monitor you link to would not appear to have an HDMI input.

the monitor would flash "component NTSC" and then say "no signal" but would never show an image

I don't have this particular monitor, but your description of flashing "component NTSC" would suggest you have selected the component (YPbPr) input, not the SDI one.

[Andy White]

When you switch from HDMI to SDI on the Scarlet, are you rebooting to refresh the output?