Beta Camera Build 3.2.13

[Raphael Varandas]

Where can I send log ? Red support did not send me any feedback since yesterday. I am having major Sdi problems with 2 Scarlett's and 1 epic M... Help me pls.

[Tim Buchheister]

Good morning, when I use my bomb viewfinder now, I can't see the white balance and ISO settings change with the image. When I use the touch screen everything is fine.
Any idea?
Thank you,
Best Tim

[Tim Buchheister]

Hi, thanks for your response. I rolled back to earlier firmware, as this version is not working, if you use your viewfinder together with your redmote. Have I posted something wrong?
Best, Tim

[Joel Arvidsson]

Is there a time frame when we can expect next build? I really want the new "key mapping" but I rather wait than run the beta. The question is how long the "wait" going to be.

[zak forrest]

i cant get phantom power working. i have a properly made xlr to balanced mini cable and several phantom powered mikes and all of them give me lots of noise and a clicking sound. the same cables worked on the last release build with no clicking sound or noise, using different microphones that had their own power though..

anyone else having issues?

[Adam Levins]

I am trying to use the force preset files in Scarlet_build_3_v3.2.13.

I upgraded, reformatted the SSD on my mac using Fat32 and placed the monitor_presets_3_2_X folder on the card. I then inserted the card and powered up the camera. I still get no output on the monitor. Any ideas what I might be doing wrong? Many Thanks, Adam

[TheBied]

I am trying to use the force preset files in Scarlet_build_3_v3.2.13.

I upgraded, reformatted the SSD on my mac using Fat32 and placed the monitor_presets_3_2_X folder on the card. I then inserted the card and powered up the camera. I still get no output on the monitor. Any ideas what I might be doing wrong? Many Thanks, Adam

- Create a folder called "force_preset" on the top level of your SSD
- Place the desired preset in the folder
- With your camera OFF, insert the SSD into the camera
- Start the camera, The preset will be applied on startup

[Adam Levins]

- Create a folder called "force_preset" on the top level of your SSD
- Place the desired preset in the folder
- With your camera OFF, insert the SSD into the camera
- Start the camera, The preset will be applied on startup

Thanks! worked perfect. When I reformat the card I have replace the force preset folder on the redmag or can I set the camera to boot to HDMI by default? Regards, Adam

[Trent Lillehaugen]

Thanks! worked perfect. When I reformat the card I have replace the force preset folder on the redmag or can I set the camera to boot to HDMI by default? Regards, Adam

The camera will continue to have HDMI enabled at boot now until you:

- reset factory defaults
- perform an upgrade
- disable it in the monitor control dialog

You should only need the force_preset file again in one of those cases.

[Sami Sinervä]

I've been running the 3.2.13 beta all weekend now on my Epic X, and it has worked fine except for one thing: sometimes the camera boots to the monitor half white/black and stays there. Have to do a hard reboot and try again. A few times it's take up to 15 restarts before I got the camera going and no half white/black view. I am very happy with it otherwise, but got to downgrade to be able to work properly with the camera.

If it is possible to send you some kind of log file, where can I find instructions on how to do it? Thanks.

Gear: Epic X, Quad battery adapter, Red Volt XLs, 5" RED Pro monitor, Redmote.