Thread: Panasonic VT30, Decklink HD Extreme, & DaVinci: No signal?

Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1 Panasonic VT30, Decklink HD Extreme, & DaVinci: No signal? 
    I just got a new panasonic vt30 as a client monitor.

    I've got the signal being output for playback with the Decklink HD Extreme over HDMI.

    All signs point to things being good but I can't get a signal on the vt30. Just black.

    I tried reinstalling the card, updating to the latest driver, and anything else I could think if. Nothing has worked yet. I made sure to check the HDMI slots on the actual VT30. They all work perfect.

    I know I am getting a signal out of the card because I can plug it into my home Sony LCD and it works perfect.

    Any ideas as to where I am going wrong?


    Thanks
    Reply With Quote  
     

  2. #2  
    What video standard are you feeding the VT30 from the BM card?
    Paul Sage
    Reply With Quote  
     

  3. #3  
    Senior Member luigivaltulini's Avatar
    Join Date
    Oct 2009
    Location
    Switzerland- LUGANO
    Posts
    1,498
    Patrick,
    I have vt30 And blackmagic 3D.
    Only 25p is not supported in hdmi. 50/60i And 24p is ok


    Luigi
    Color Correction DAVINCI Resolve/Digital Workflow/Red Camera Rental
    CARBON DRAGON #44 "DJANGO"
    DRAGON #599 "MACHETE " and EPIC #668


    SITE
    www.cine5k.ch

    www.rsi.ch
    Reply With Quote  
     

  4. #4  
    I tried all the feeds.

    Still get nothing but black.


    Not sure what is going on here
    Reply With Quote  
     

  5. #5  
    Senior Member Doug Beatty's Avatar
    Join Date
    Aug 2011
    Location
    Los Angeles
    Posts
    756
    Are you running the Beta version of resolve or the release version? If beta, you may try rolling back. Doing that cleared up my decklink problems.
    Reply With Quote  
     

  6. #6  
    I think this is the first version for Windows that I am on. Trying it out on a new station.

    I checked the support page but couldn't find any previous versions.

    8.2 Beta is what I am on.
    Reply With Quote  
     

  7. #7  
    Are you feeding it P or Psf ?
    Paul Sage
    Reply With Quote  
     

  8. #8  
    I tried both.

    I tried changing it on the actual Decklink Device manager page from psf to p.

    Then I went into Resolve and literally tried every output signal.

    No Change.

    I have tried all the out signals but nothing changes.
    Reply With Quote  
     

  9. #9  
    Do you know if you are using a hdmi 1.4 or 1.3 cable? It might not matter in this case, but I do notice some devices behave better with 1.3 cables. Obviously you wouldn't get certain features this way. If you have both types of cables, it's worth trying.
    Reply With Quote  
     

  10. #10  
    Just tried 3 different hdmi 1.4 and 1.3 cables.

    still no change.
    Reply With Quote  
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts