ActionProducts Modular Solutions for the EPIC (Electra)

[Justin R Goff]

Hi, looks like a great product but please state definitively what the wait time is for the whole power package plus the top plate.
Thanks

- The new version of the TopPlate will work with both the EPIC-M and the EPIC-X. Also, based off of REDs specifications of the dimensions and the mounting points of the SCARLET, the TopPlate and all of the EPIC Accessories will also work with the SCARLET. If the TopPlate is ordered today, it should be available within 2-3 weeks. I will be able to give a more accurate time frame, very soon. I do recommend you order soon to help secure your place in line, as the soon to come batches are selling out fast.

As for all the Power Modules and their packages, they are still on pre-order status and the first batch that we are aimng to have ready before Christmas is already sold out. The 2nd batch will be available sometime between mid to late January. After that, we will be shipping more regularly and should have faster fulfillment rates.

The January batch of Power Modules are selling fast, so if you want to receive one within a reasonable time frame, please place an order as soon as possible.

Power Module Packages:

• EPIC Power Package "Proteus" + "Electra" + Battery Module
• EPIC Power Package "Proteus" + "Electra" + V-Mount / AB Plates

Or if you only need V-Mount or Anton/Bauer Battery power to the camera without the power distribution of the "Electra", buy both these Power Modules together.

• EPIC Basic Module "Proteus"
• EPIC Battery Module

Again, we apologize for the slow turn around time on these EPIC accessories. They are in such high demand that it has been difficult to manufacture them fast enough. Please continue to bare with us as we continue to work hard to fulfill these products.

Thank you for your interest and patience. I will provide more updates as I receive them.

[Justin R Goff]

Introducing our NEW SwivelMount system for the Battery Module. This Battery Module can seamlessly slide on and off of the "Electra" or "Proteus" found in our Full EPIC PowerPackage. When used by itself, it can mount and swivel on 15mm Rods, 19mm Rods, and a ShoulderMount. Below are some pictures should verious setups of the Battery Mount with our new SwivelMounts coming next week.

(Click to Enlarge)


Below are some pictures of the Battery Module using the NEW 15mm "Lightweight" SwivelMount
(Click to Enlarge)


Below are some pictures of the Battery Module using the NEW 19mm SwivelMount
(Click to Enlarge)


Below are some pictures of the Battery Module mounted to the ShoulderMount using the NEW ShoulderMount SwivelMount
(Click to Enlarge)


I will be posting prices and links to the NEW SwivelMounts product listing early next week. STAY TUNED!!!

[Mike Halper]

I like the option of mounting the battery plate on rods. Makes the connector on the back of the camera still available for the Redmote. Just a thought/suggestion, it would be nice if the battery plate was on a quick release so that it could quickly be moved from the rods to the back of the shoulder pad as a counterweight. The lemo cable would possibly need to be swapped as well, or have the use of a coiled cable so it could just be stretched. Maybe that is a quick release there and I just can't fully tell from the pics.

[Daryl E. Goff]

The external quick-release module is what you are looking for (left side on the picture).

[Justin R Goff]

Fabian Weber's EPIC X outfitted with ActionProducts Proteus, Electra, and Battery Module:



thread

[Justin R Goff]

New Products Now Online - Exclusively at Innocinema!!!


ActionProducts accessories featured in this post: ShoulderMount "razor" SwivelMount for BatteryModule/SwapPack,
15mm SwivelMount Lightweight for BatteryModule, and our 19mm SwivelMount for BatteryModule






ShoulderMount "razor" SwivelMount for BatteryModule/SwapPack

The "Razor" SwivelMount allows you to mount the the BatteryModule and the SwapPack directly to the "Razor" Shoulder-Mount.

• Can mount to the BatteryModule
• Can mount to the SwapPack
• BatteryModule or SwapPack can be rotated in 45° steps around the swivel (BatteryModule and SwapPack not included)
• 7075 "Aircraft" aluminum - milled! Anodized
• $338.00 USD - View In Store (North and South America) View In Store (Rest of World)

15mm SwivelMount Lightweight for BatteryModule

The 15mm (60mm spacing) swivel allows to connect the ActionProducts BatteryModule standard 15mm Rods. One knob adjustment with 360° rotation.

• Can mount to the BatteryModule (BatteryModule and Rods not included)
• Provides 360 adjustment
• 15mm Rods (60mm spacing) setup
• 7075 "Aircraft" aluminum - milled! Anodized
• $225.00 USD - View In Store (North & South America) View In Store (Rest of World)

19mm SwivelMount for BatteryModule

The 19mm swivel allows to connect the ActionProducts BatteryModule and the SwapPack to standard 19mm Rods. One knob adjustment with 360° rotation.

• Can mount to the BatteryModule (BatteryModule and Rods not included)
• Provides 360 adjustment
• 19mm Rods setup
• 7075 "Aircraft" aluminum - milled! Anodized
• $338.00 USD - View In Store (North & South America) View In Store (Rest of World)

Thanks for checking out our products! If there is any questions feel free to post here or contact us. Thank you!

[Justin R Goff]

Stephen's EPIC outfitted with the ActionProduct's Power Modules

Just got mine, very happy

link

[Justin R Goff]

New ActionProducts EPIC Accessories at Innocinema!





Basic Module "Nereus"

Main functionality is to provide a sturdy mounting point for battery plates, as well as provide the modular line up with quick release functionality.

-Allows for quick release of additional power modules
-Allows for sturdy attachment of AB/V-Mount plate or to EPIC or Scarlet
-Mount Battery Module directly or through Power Module "Electra"
-7075 "Aircraft" aluminum - milled! Anodized.





(Will be finished in black, shorter cables available)









Universal Arri Adapter Plate (longer)

Turns basically every dovetail or tripod plate into a Arri-Bridge Plate compatible dovetail. Also to use with third party Arri-Style Bridge Plates (like RED's or ActionProduct's Bridge Plate).


-300 mm (11.8") long
-Several 1/4" and 3/8" threads to place where ever your tripod-plate or dovetail allows it
-High quality milled, lock-in design
-DUROX hard-anodized




Ordering information coming soon. Stay tuned!

[Dylan Macleod, CSC]

Does your 15mm swivel mount include the cable to power Epic? Nice looking stuff!

[BrandonChristensen]

Keeping my eye out on these.

Is that shoulder pad have rail support? hard to see with the angle.