Search:

Type: Posts; User: Trent Lillehaugen

Page 1 of 10 1 2 3 4

Search: Search took 0.01 seconds.

  1. You can do a hard reset by holding the power...

    You can do a hard reset by holding the power button down for 20 seconds while powering-up (you can let go once the fans go full speed). This will restore everything to the factory default settings.
  2. Unfortunately, the camera does not support...

    Unfortunately, the camera does not support playing back DNxHD/HR clips.
  3. Replies
    2
    Views
    1,161

    It indicates that a remote device is connected to...

    It indicates that a remote device is connected to the camera (like Fool Control).
  4. Replies
    2
    Views
    1,213

    By default the HDMI monitor has the menus set to...

    By default the HDMI monitor has the menus set to Auto Hide. Try pressing the MENU button on the Side Handle (the button up and to the left of the directional keypad) - this should bring up the...
  5. Yes, you can do this. If it is an external HDMI...

    Yes, you can do this. If it is an external HDMI monitor it will work right out of the box. Simply press the MENU button on the side handle to bring up the top and bottom bars which are set to auto...
  6. Replies
    6
    Views
    3,392

    The DSMC Toolkit (available on the Other section...

    The DSMC Toolkit (available on the Other section on the Download page) contains a frame guide application that may do what you want. What exactly are you looking for?
  7. Replies
    285
    Views
    89,224

    Menu > Overlays > Status > Camera/Lens

    Menu > Overlays > Status > Camera/Lens
  8. Replies
    285
    Views
    89,224

    Furthermore, it is impossible to accidentally...

    Furthermore, it is impossible to accidentally install the incorrect firmware on a camera. The camera will verify the upgrade package and skip the install if it is not correct.
  9. Menu > Overlays > Status

    Menu > Overlays > Status
  10. You can already define any arbitrary frame guide....

    You can already define any arbitrary frame guide. You can either:
    1. Set the Mode to 'User' and enter in a custom Aspect Ratio (like 0.75 : 1)
    2. Set the Mode to 'Absolute' and define the frame...
  11. It's not exactly what you are asking for, but you...

    It's not exactly what you are asking for, but you can get the dimensions (in mm) of your current format by going to the Advanced Format Dialog. You can get there by:
    - Opening the Format spinner...
  12. What did the camera do when you attempted the...

    What did the camera do when you attempted the upgrade? Did it boot up normally? Did it power up and then power down a few seconds later?

    If it booted up normalyl it is because it didn't see the...
  13. In 6.4 it has moved to: Menu > Overlay > Status...

    In 6.4 it has moved to:
    Menu > Overlay > Status > Camera
  14. Reset Defaults: restores all user settings to...

    Reset Defaults: restores all user settings to factory defaults but does not remove user files (LUTs, Presets, Calbirations, etc.).
    Wipe Camera: Restores all user settings to factory defaults and...
  15. Replies
    5
    Views
    1,373

    Furthermore, the pause only occurs in Preview...

    Furthermore, the pause only occurs in Preview (that is, when you are not recording). As long as you are aware of why the pause is occurring, there should not be any concern.
  16. Replies
    40
    Views
    15,758

    Thank you, this issue has been identified and...

    Thank you, this issue has been identified and will be fixed in a future release. For now, the safest thing to do is to disable record sounds.
  17. Replies
    40
    Views
    15,758

    Auto calibration is not updated while recording,...

    Auto calibration is not updated while recording, only during what we call preview (standby). If you are seeing the monitors freeze while record is active it might be something else - you may want to...
  18. Replies
    40
    Views
    15,758

    This is just informing you that the auto...

    This is just informing you that the auto calibration is recalculating and applying. It is normal for this to occur somewhat frequently at boot as your camera comes up to operating temperature. This...
  19. For what it's worth, if the camera's IP address...

    For what it's worth, if the camera's IP address is 169.254.x.x when DHCP is slected that means it could not find a DHCP server and auto assigned itself an IP address pursuant to RFC 3927 (see...
  20. Replies
    5
    Views
    1,095

    Glad to hear you have things working. Your...

    Glad to hear you have things working.

    Your solution with Cycle Mode is probably better since it won't affect any of the other monitor settings like my preset solution.
  21. Replies
    5
    Views
    1,095

    Setup the camera the way you want it for EVF...

    Setup the camera the way you want it for EVF control. Create a preset of this configuration:
    1. Goto: Menu > Presets
    2. Select "Create..."
    3. Enter a name for your preset. E.g.: "EVF"
    4. Select...
  22. Replies
    5
    Views
    1,095

    You can only have one active control screen at a...

    You can only have one active control screen at a time. You can control the menus on the EVF using the sidekick or use the touch controls on the 5" LCD; but not at the same time.

    The monitor...
  23. Replies
    2
    Views
    1,448

    There is a "Tools" checkbox for each monitor in...

    There is a "Tools" checkbox for each monitor in the monitor config dialog. Ensure that this checkbox is checked for the monitor you are looking at.
  24. Replies
    4
    Views
    952

    You can read about it here from a post I wrote a...

    You can read about it here from a post I wrote a while back introducing the feature.
  25. Replies
    8
    Views
    2,423

    The notification was added in the beta to make...

    The notification was added in the beta to make people aware when the auto calibration is being updated. During this time the preview can stutter slightly. This stuttering, although normal and...
Results 1 to 25 of 250
Page 1 of 10 1 2 3 4