When I've messed up a little bit with RS2 and Sony A7R III - the Raven Eye was very sensitive to the cable. You have to use the exact cable for the connection, otherwise it's not going to work at...
Type: Posts; User: Alex Lubensky
When I've messed up a little bit with RS2 and Sony A7R III - the Raven Eye was very sensitive to the cable. You have to use the exact cable for the connection, otherwise it's not going to work at...
You can use counterweights also, this can shift the balance and the camera might not need to be this far back to center the weight distribution.
Example
literally, you can use any device, that converts SDI to HDMI. Then, it's much cheaper to feed into the computer.
If you're into snowboarding - I bet you've seen/heard of Korua Shapes. Keep up with awesome! The videos are top-notch!
You can stream out of Hollyland Mars series of recievers. Look for it on youtube, it's the easiest/cheapest way that I've found for my Scarlet MX, and they have an SDI solution (mars 400s). The...
Actually there's a problem with Zeiss lenses for Canon when used with adapters. It's known that you can't use Zeiss lenses through e>ef smart (i.e. with pins) adapter on Sony mirrorless (a7sII,...
But how are you going to make it work just with a 45deg mirror? Does the Komodo have a built-in LCD flip function? Because, otherwise, it's going to have a flipped image in the result (you can...
I bet it's going to come up some time in the FW upgrade. The time-lapse features on any RED, except for Komodo (for now), are one of the best ones I've met. Frame averaging, frame summing, taking...
I’ve put a RED Scarlet MX with 16-35 and a 145wH v-mount on rs2 yesterday, works like a breeze. Had to strip the camera down, but a 4500g setup is a breeze for rs2. Thus, see no problem to put a...
awesome!
Install previous version of the driver.
Are you sure it's fried? Actually, it's a common problem - when on startup the screen is black. You can try re-plug a monitor cable, or restart the camera. Usually second start-up is ok.
The same...
Have to say though, it’s pretty much the same on BM Ursa Mini pro G2. When set to highest FPS in 2k it has similar response in quality of the image.
You can think of it this way - it’s the same...
Yes, it’s normal. First of, you’re magnifying the lens rather heavily, thus you see how your lens resolve in a 200% magnified way. Also, it’s a bayer pattern sensor, which means you loose about 30%...
Ohhh-kay, how about speeding up car chases - some are shot using 20-22 fps timebase. Or stop-motion effect, usually shot at 3-5 fps. Or falling in a dream/coma shot at 15-18fps with wide-open...
Nothing wrong here, at 6k it’s bigger than s35.
Actually, those are not the only one lenses, which are going to vignette on wides. Say, wider Master Primes vignette on Gemini @5K.
My own RPZ...
Red bricks are known to be a moderate battery. Any decent V-Mount battery is fine, don't run for the Red Bricks - at best you'll find re-packed ones, or quite old and dead batteries. There are plenty...
С300 mk III will cut much smoother with Alexa, compared to C70. I've tested out the C300 mk III both in XF-AVC (which is supposedly the same or a tad better than on C70) and RAW. C70 has some more...
Each set of lenses that You've mentioned - has CA. Be it .CP2, FD of Canon L - all of them are known to have CA (some more, some less). They are not MP, or even UP - the more resolution you have the...
Each set of lenses that You've mentioned - has CA. Be it .CP2, FD of Canon L - all of them are known to have CA (some more, some less). They are not MP, or even UP - the more resolution you have the...
That's exactly why I'm telling everyone that adapters are shit. You can get a 100% robust result only with a native mount.
Otherwise, there are mounts with support screws to hold them in place. I...
Short answer - yes.
Swapping batteries is ok, no need to reconnect the sdi if it’s connected to the onboard monitor.
You can use any cable you want, be it 3g, 6g, 12g or 1.5g. It's the speed of the cable, not the quality of connectors.
And yes, you can damage your camera with SDI, especially this is true when...
Honestly, a lot of things here are subjective. While, I kind of agree with shorter flange distance is a must nowadays, I still prefer the old mount system - where you can swap a mount instead of...