Search:

The problem is the weight. Without anything to support it, it will be very hard to actually work long days with it. Keeping weight down is a priority so that rig seems pretty hard to work with? I...

They only need some box that can attach the Raveneye, Lidar eye, power the focus motor and it would work. So far it works perfectly fine with tracking and stuff, but not at far distances due to how...

Yeah, lidar is preferable. But don't the newer iPhones have Lidar built-in? What's powerful is that if we have a consistent video stream to the phone it could act as a processing unit for a lot of...

Putting my Hydrogen on the Komodo using the Link I realized that the depth camera is properly facing the subject like the DJI lidar focus tracking does. Would it be possible to actually utilize this...

But the Manfrotto plate means no quick release is possible? However, it might be good if the plate works on Manfrotto tripods and handheld rigs, that way it can stay built through changes in setups....

So, finally got my RS2 after months of backorder.

Things I've noticed, the focus motor is enough to pull my CN-Es so that's good, but at the same time I've noticed that the motor is pushing the...

A reminder that I hope Red is looking into the Komodo Link Adapter to output video directly or work with the Raven-Eye in some way. It would be fantastic if we could ditch a SDI to HDMI converter and...

For editing or grading? I have moved away from having a monitor dedicated for editing since I can just play things in full screen when reviewing an edit and most stuff will be viewed in a smaller...

It's still upscaling. You don't get more resolution after de-squeeze, you just stretch the pixels and there's no 4:3 sensor in any Red camera except Gemini that enables more vertical resolution...

Maybe because the cost of Komodo makes it easier for people who can't afford a DSMC2 to start using a Red camera, which means a lot more people using it, which in turn means the percentage of bad...

So how does it differ from still camera sensors that do this?

Not really sure why it is hard to implement? But at least have the same kind of timelapse capability as DSMC2s.

Why can't we have longer shutter exposures with any Red camera? It's like one of the most common things on a regular still camera and Red has since DSMC had "still" in their name so why not offer the...

Many creators try to pierce the white noise by focusing on their own made-up identity online as the main focus of their creative output because being original through the actual art and craft is...

It should, but I’ve also seen tests that show a minor difference when exposing for a certain ISO, so generally get a good exposure on set and don’t stray too far from the chosen ISO in post. I’m not...

As I said, I appreciate you putting up examples of people's work, I just think a dedicated thread would be better for it, maybe even a sticky so people can always find example videos. It would both...

Yeah, I'm thinking more for low budget stuff, maybe we get away with the onboard video transfer from Komodo. Compared to low-cost wireless video, it performs well. But then again, if adding a monitor...

What about this one?
https://www.coreswx.com/store.coreswx/product/nano-c98/

If it's not damaging the camera to use these (due to higher volt), it could easily be attached to the right slot on...

I agree, it's nice that you post videos that goes online, but maybe have a dedicated thread where you update it rather than in this thread. Some conversations just drown away in the noise.

Best balance is ISO800 because that's closest to the RAW range that is fixed before any ISO gain is applied. So ISO800 correlates closest to what the camera "sees". Use the stop lights to be extra...

But isn't it a Canon battery attached in the picture? Damn shame if there's no BP solution, then it would work. It would be even better if it was possible to have something like this, but that...

Sounds promising, but worried it would add a lot of weight. Saw this picture in another thread:

http://www.reduser.net/forum/attachment.php?attachmentid=125222&stc=1&d=1607143296

Seems to have...

That battery plate thing, what does it do? Is that only to get 12v out of the battery? Because that would solve the problem with remote focus motors not getting enough power, like the WCU-4.

If this could be solved and put on the Komodo without any change in battery setup, that would be awesome. Then the Arri WCU-4 would work. However, I'm not sure how the 12v can be made to work?

Is...

This would just incite the question of why I just don't go with a V-Lock battery belt clip to drive the entire setup. Why split up batteries like that?




Yeah, I feel like Red is extremely...