Search:

Yes, I agree 100%. I just wanted to make a point that the timecode via a wireless mic tx/rx combo would be accurate and there would be no delay in the transmitted TC provided that there are no...

Wireless mic systems such as G2 which are based on analog transmission model do not have any meaningful delay. As far as I understand it, the timecode gets stamped on an R3D file only during the...

Upon closer inspection and checking the images at ISO 12800, I'm not sure if we are talking about the same thing here. I was referring to the faint horizontal stripes that appear only on the part of...

Andre, thank you for your answer. Black shading indeed wasn't made on location. There were alternating interior and exterior takes. I think there were substantial temperature differences.

I'll...

Slot-in wireless mic receiver adapters come with a V-slot attachment and pass-through power. They are actually quite handy if you have a Pix Prores recorder attached to your camera. This is one of...

I just encountered a curious issue with a practical light. The light source has a tubular gridded metal sheet on it. When the grid is in focus, there seems to be some sort of current bleeding appears...

Hi Mark,

A friend of mine is developing electric saildrives for sailboats. Like traditional towed or boat mounted hydro generators, they can regenerate a substantial amount of electricity while...

I own four Paglinks. They work very well with a Scarlet take a load of 8 amps with a single battery and 12 amps when linked.

A single battery can easily power Scarlet and a Pix 240, for example.
...

No luck with a PC either. Sending it in for evaluation.

Thanks for the tip, Eric. I'll try that tomorrow. I have also contacted my rep about the issue.

Chris, did you ever find a solution to this problem? I am having the same issue. I also tried another reader. That particular Redmag functions normally on camera though, just like yours. It just...

Thanks for the picture!

I have a side handle permanently mounted on my camera so the loss of these particular mounting holes wouldn't be a big issue for me. Additional mounting holes in the back...

Also, I think that a 4-pin hirose input would be a better and more universal DC input connector. Wireless mic receivers, on-board proxy recorders, audio mixers etc. often have this type of DC input....

Patrick, I am not sure which mounting points you are referring to. The lone ones at the corners on the top and front of the plate (which are not aligned with the three mounting point rows) could be...

That looks like a really great innovation!

I was wondering if it would be possible to change the location of the fan speed adjustment dial to the side instead of the back so that it would be more...

Indeed, on tape based cameras and on some audio recorders too (Nagra DII) there was a separate "confidence head" that read the track that had just moments earlier been recorded by the actual record...

Ahh!! Thanks for clearing this up. I didn't even bother to research this before purchasing the APU-IDX plate. I simply assumed that it must be fully wired since it is one of the more popular and well...

I did some testing with 3.2.19 firmware. The hot swapping of the v-mount battery works as expected when there is a redvolt in the side handle. Also, it switches over to the side handle battery...

Steve, I haven't used the Bomb EVF, but the Grid Suportes loupe is certainly good enough for using the touch LCD in bright sunlight. There is some distortion at the edges, but it's really not an...

I recently received PL96e Paglink batteries for my Scarlet-X. The in-camera battery remaining percentage display doesn't work with the APU-IDX V-mount plate, but other than that, they do work as...

I'm not sure if these issues are relevant in USA, but here are some of the issues I've encountered while researching insurance policies here in Europe:

1) If your camera is not returned after a...

I e-mailed the manufacturer last December, but never got a reply. I was interested in them mainly because of the significantly longer lifecycle.

You could use a Timecode Buddy master transmitter on the Scarlet and two Timecode Buddy receivers on the 5Ds. Use Video Toolsheds FCP auxTC reader to decode the TC track recorded as audio on the...

Adam, the 5-pin XLR on the Pro i/o module is for output only. For input you can use the standard XLR3 connectors on the Pro i/o in analog mode.

You can also use the AES input on the pro i/o...

I've been happy with http://gandi.net/

They are rock solid and you get exactly what you pay for.. none of that "unlimited bandwidth, unlimited disk space" BS.

Google Premium is great for...