i dit not know that Petrol makes bags special for REd cam's. From this 4 bags, i would prefer the Petrol Red Bag (PRB15). Petrol is good in price and quality...
I was pretty excited by the design of the thing when I saw it, Peter. It is designed for the Red One though so I'm wondering how good it is for a camera with the form factor of the Epic/Scarlet. It's also discontinued according to B&H so the used route might be the only way to go in order to get it.
4K+ in a backpack.......still blows my mind.
Though I'm putting together something a little more production friendly, I have a Think Tank airport international backpack that I used to take a fairly complete Epic package to Europe.
Approximate contents included:
Epic-x with viewfactor cage and DSMC side handle
5" touch LCD
6 redvolts and 2 travel chargers
4x SSD mags
Pix240 w 2x SSD drives
7x Leica R cine-modded lenses
2x red station SSD readers
Tiffen 77mm filter set (.3, .6, .9, 1.2, 1.5IR, 1.8IR, 2.1IR, pola, optical clear) and screw-on lens shade
Various cables, bits, bolts, allens
17" MBP fits in the outer sleeve (not padded, but for personal transit, it works
Basically everything I'd need to shoot if all my checked gear got lost in transit...
The best part about this backpack is it meets international carry-on requirements, which are generally more restrictive than domestic. On the way to Italy, I had a puddle-jumper from NYC to Boston, and my heart sank when they told me my backpack likely wouldn't fit inside the cabin, but I insisted on trying. My wife's satchel would barely fit in the overhead, but my think tank slid right under the seat (minus the MBP)...from that moment forward, I knew I had the best travel backpack for this camera system!
One other feature I like about think tank bags compared to others is it seems to give you the most useable space inside by maintaining a rectangular shape (whereas most camera/photo backpacks I looked at have curved edges, and therefore wasted space).
Only downside is I chose the non-rolling version (more useable space given outer dimensions, lighter starting weight)...my bag ended up weighing about 60 lbs, so was quite a bear when walking nearly a mile from Logan's domestic to international wing. That said, international carry-on requirements say bags must weigh something ridiculous like 22lbs or less, so I wanted a bag that was as light as possible before I jammed all my equipment inside...and then I did my best to not show any struggle when picking it up by ticket counters...ah, the things we do for our profession!
Will have to look and see if I have any pictures of my pre-journey packing job, as it was an amazing sight to behold.
A fully functional hand-held rig fits in my porta brace, minus battery (though I can stuff a couple batteries in there). It fits in the case in a tripod config, and the handheld junk has to be added after it's left the bag. FYI, that's the Pix 240 hanging off the back under the Brick.
Focus knob, Aaton hand grip and shoulder pad go in the side pocket, and filters (up to 6) go in the side bottom pocket (intended for a ENG quick release plate). There's also extra space to put in media (not in it's plastic box, though) and other junk in the top drop-in drawer part (pictured with mattebox), which is made from corrugated plastic, taped together. LCD touchscreen goes in the plastic corrugated box stuck infront of the lens.
The viewfinder part of the case folds up for air travel, and I have to empty the side pockets, but I can jam most of it in around the camera. Technically, it's too big for carry-on, but one of the reasons I bought the porta brace is that it's color and design is universally recognizable as "fancy camera" to airline staff and flight attendants, so they don't mess with me.
FYI, I custom designed and machined most of the bracketry to make the smallest/lightest rig I could, so I can't say that any other config would fit (though I did carry my RED One in here, so it's not that tight).
Which Portabrace is that Frazer?
I don't know the model, and I can't seem to locate the exact model on the website, but it may be an older (now almost three years old) version of this one:
In the meantime I'm carrying a full set of Dedolight DH4s (including stands) and a couple of DSLRs with lenses in it :biggrin5:
BTW, I managed to take it on a plane with me as carry on, it all depends on the person who's checking in your luggage and how you deal with them
I take mine on planes regularly. The only time of 20 or more that I've ever had an issue was on tiny commuter planes, where's there literally nowhere it fits. I carry fragile stickers for those instances, but it's still hair raising.